(No.HC034<Rev.001>)1-17
4.4
FLOWCHART OF ADJUSTMENTS
NOTE :
As the camera adjustment data is stored in the EEP-ROM on the OP block, the split screen adjustments are complete at the factory
before OP block assembly is supplied as service part.
When replace the OP block assembly, only camera process adjustment is required. The SYS CPU has backup of the camera pro-
cess adjustment data, so copy it from SYS to EEP-ROM on OP block by the service menu No. 201 when replace the OP block
assembly.
START
END
OK
NG
START
END
OK
NG
Check Split Screen
Replace the OP block
Execute the ADJUST MENU No.201
"EEP COPY SYS TO CAM"
(Camera process adjustment data is
installed to the EEP-ROM on the IS board)
Check Split screen
BLACK adjustment
(60, 50, 40 & 48)
Black adjustment
(60, 50, 40 & 48)
In case of the split screen is visible
When the OP block assembly is replaced