JVC GY-HM750U, Инструкция по эксплуатации

Страница: 85 / 141

79
Switch Set Item
* Default values are indicated in bold characters.
Item Setting Values Function
FAW None
PRESET
A
B
For assigning the FAW (Fulltime Auto White Balance) function to a position on the [WHT.BAL.]
selection switch.
This is fixed at
A FAW B when the [FULL AUTO] switch of the camera recorder is set to A ON B .
None : FAW function is not assigned.
PRESET : Assigns FAW to the PRESET position.
A : Assigns FAW to the A position.
B : Assigns FAW to the B position.
GAIN L
GAIN M
GAIN H
ALC, 18dB, 15dB,
12dB, 9dB, 6dB,
3 dB,
0dB
For setting the gain value of each position on the [GAIN] selection switch.
This is fixed at
A
ALC
B
when the [FULL AUTO] switch of the camera recorder is set to
A
ON
B
.
(Default values GAIN L: 0dB, GAIN M: 9dB, GAIN H: 1 8 dB)
USER1
USER2
USER
3
By assigning one of the following functions to each of the [USER1]/[USER2]/[USER 3 ] buttons, these buttons can be
used to control the assigned function (on/off, start, switch).
Set according to the shooting conditions. Usable only in the Camera mode.
(Default values USER1: Bars, USER2: B.Stretch 3 , USER 3 : Load File)
Setting Values Description
None No function is assigned.
Bars Assigns the function of [Bars] in the [Camera Function] menu. ( A Page 78)
Load File Assigns the function of [Load File] in the [Setup File Manage] menu. ( A Page 95)
Clip Review Assigns the Clip Review function. ( A Page 56)
B.Stretch1
B.Stretch2
B.Stretch
3
B.Stretch4
B.Stretch5
B.Compress1
B.Compress2
B.Compress
3
B.Compress4
B.Compress5
Assigns the functions of [Stretch Level] and [Compress Level] under [Black Toe] in the
[Camera Process] menu. (
A Page 82)
LENS RET Clip Review
OK Mark
Focus Assist
Return
For assigning a function to the [RET] button on the lens. This function does not work if the [RET]
button is not available on the lens in use.
Clip Review
: Assigns the Clip Review function to the [RET] button. ( A Page 56)
OK Mark : Assigns the OK mark function to the [RET] button. This function operates
during shooting. ( A Page 55)
Focus Assist : Assigns the Focus Assist function to the [RET] button. ( A Page 3 7)
Return : Assigns the return video display function to the [RET] button.
Memo :
● The A Return B setting is enabled only when VF-HP790G is connected, and [SDI RETURN] in
the [VIDEO FORMAT] menu of VF-HP790G is set to
A
ON
B
. Also, return images only appear
on VF-HP790G, and will not be displayed on the LCD monitor of this camera recorder.
Clip Review Last 5 sec
Top 5 sec
CLIP
For specifying the operation when [LENS RET] is set to A Clip Review B .
Last 5 sec : Views about 5 seconds of the clip from the ending.
Top 5 sec : Views about 5 seconds of the clip from the beginning.
CLIP : Views the entire clip.
Memo :
● Selectable when [LENS RET] is set to A Clip Review B , or when any of the [USER1]/[USER2]/
[USER 3 ] buttons is set to A Clip Review B .