56
Shooting
You can check (review) the last recorded video clip on the
screen.
However, the video clip cannot be played back if the settings
of the camera recorder are different from the video format
(Camera Resolution/Frame & Bit Rate) of the clip.
(
A
Page 75)
Memo :
●
To use this function, assign
A
Clip Review
B
to any of the
[USER1], [USER2], [USER
3
] buttons or the [RET] button
on the lens.
* [Main Menu]
B
[Camera Function]
B
[Switch Set]
B
[LENS
RET]/[USER1]/[USER2]/[USER
3
]
B
A
Clip
Review
B
(
A
Page 79)
1
Press the button assigned with the
A
Clip Review
B
function during standby (
A
STBY
B
is displayed).
Playback of the configured section starts.
Memo :
●
The video clip is played back according to the [Clip
Review] settings in the [Camera Function] menu. By
default setting (Last 5 sec), the last 5 seconds of the clip is
played back. (
A
Page 79)
●
When playback is complete, the camera recorder exits
Clip Review and returns to
A
STBY
B
(recording standby)
mode.
Note :
●
During Clip Review, only the [CANCEL] and [REC]
buttons are enabled. Press the [CANCEL] button to
cancel clip review and return to
A
STBY
B
(recording
standby) mode. Press the [REC] button to cancel clip
review and enter recording mode. It will take some time to
start recording after the button is pressed.
●
When the last clip is less than 5 seconds, the whole clip is
played back.
●
Only video clips in the currently selected slot can be
reviewed.
●
When there are no clips in the selected slot, Clip Review
function is disabled.
●
Clip Review is unavailable when Clip Continuous Rec is
paused (STBY
C
, yellow text). To operate Clip Review,
use the [CANCEL] button to set to
A
STBY
C
B
(white text)
first. (
A
Page 59)
●
Clip Review is unavailable when the camera recorder is
connected to an external e
q
uipment and the e
q
uipment is
in recording state.
You can assign functions to the [USER1], [USER2], and
[USER
3
] buttons.
By assigning functions to the [USER1], [USER2], and
[USER
3
] buttons, the usability of the camera recorder is
enhanced.
1
Assign functions to the [USER1], [USER2], and
[USER
3
] buttons from the menu. (
A
Page 79)
Set each of the [USER1], [USER2], and [USER
3
] items in
the [Main Menu]
B
[Camera Function]
B
[Switch Set] menu.
Memo :
●
Operations of the [USER1], [USER2], and [USER
3
]
buttons are interlocked with the menu settings.
●
When the menu screen is displayed, these buttons
function as the menu operation buttons. (
A
Page 70
[Basic Operations in Menu Screen])
Viewing Recorded Videos
Immediately (Clip Review)
RET
IRIS
A M
W
T
[RET] Button
Assigning Functions to
User Buttons
[USER1], [USER2], [USER
3
]
Buttons
Содержание GY-HM750U
Страница 7: ...V FOR USE IN CHINA ONLY ...
