76
Menu Display and Detailed Settings
Rec Mode Menu
Clip Set Menu
* Default values are indicated in bold characters.
Record Set Menu
(continued)
Item
Setting Values
Function
Rec Mode
Normal
Pre Rec
Clip Continuous
Variable Frame
For selecting the record mode for recording to the SDHC card. (
A
Page 58)
Memo :
●
[Variable Frame] is selectable when [Camera Resolution] is set to
A
1280x720
B
, and [Frame & Bit Rate] is set to
A
3
0p (HQ)
B
,
A
24p (HQ)
B
, or
A
25p (HQ)
B
.
Frame Rate
For setting the recording [Frame Rate] when [Rec Mode] is set to [Variable
Frame].
Memo :
●
When [AE LEVEL] in the [Main Menu]
B
[Camera Function]
B
[Switch Set]
menu is set to
A
AE LEVEL/VFR
B
, you can use the cross-shaped button (
H
I
) to select the frame rate during Variable Frame Rec. In modes other than
Variable Frame Rec, the cross-shaped button (
H I
) functions as the [AE
LEVEL] setting button. (
A
Page 80)
●
When [Frame Rate] is changed and the shutter speed becomes a value that
is invalid for the current [Frame Rate], the shutter speed is automatically
changed to match the current [Frame Rate].
When [Frame & Bit Rate] is
A
3
0p (HQ)
B
60, 48, 40,
3
0,
24, 20, 15, 12, 10
When [Frame & Bit Rate] is
A
24p (HQ)
B
60, 48, 40,
3
0,
24,
20, 15, 12, 10
When [Frame & Bit Rate] is
A
25p (HQ)
B
50, 40,
25,
20, 15, 12.5, 10
Pre Rec Time
5sec,
10sec, 20sec
For setting the pre-recording time when [Rec Mode] is set to
A
Pre Rec
B
.
Slot Mode
Series
Dual
For setting the operation of the card slot. (
A
Page 57)
Series : Mode that activates the two slots se
q
uentially.
Dual
: Mode that activates the two slots at the same time.
Memo :
●
When this is set to
A
Series
B
, and recordable media are loaded to both the
slots, pressing the [REC] button starts recording only to the card in the
selected slot (active slot).
●
When this is set to
A
Dual
B
, and recordable media are loaded to both the
slots, pressing the [REC] button starts simultaneous recording to the cards in
both slots.
Item
Setting Values
Function
Clip Name Prefix
xxxG
(The default value of xxx
is the last three digits of
the serial number.)
For setting the first four characters of the name of the clip file to be recorded to the SDHC
card.
Enter any of the
3
8 characters including alphabets (upper case), numbers (0 to 9), “_”
(underscore), and “-” (hyphen) using the software keyboard.
(
A
Page 71 [Text Input with Software Keyboard])
Reset Clip
Number
^
For assigning a new number to (Clip Number) by resetting it (0001). Select [Reset] and
press the Set button (
R
) to reset the number.
When other clips exist on the SDHC card, the smallest available number is used after reset.
Example: If the [Clip Name Prefix] is
A
ABCD
B
, and
A
ABCD0001
B
already exists on the
SDHC card,
A
ABCD0002
B
will be assigned.
Содержание GY-HM750U
Страница 7: ...V FOR USE IN CHINA ONLY ...
