7
Rear panel
Index of Parts and Functions
•
•
•
•
•
1
1
2
3
4
5
7
8
11
9
6
12
10
RGB
RGB
REMOTE terminal
Terminal for controlling the monitor by an external control. (
Page 20.)
E. AUDIO 3G/HD/SD SDI (IN 1, IN 2) terminals (BNC)
Input / Output terminals for the HD/SD SDI signals.
The terminals accept also EMBEDDED AUDIO signals including
up to 16 audio channels with a sampling frequency of 48 kHz.
RGB-IN (mini D-sub 15pin)
Input terminal for analog RGB signal. ( Page 27.)
HDMI terminal
Input / Output terminal for HDMI signals. Will not display or
output HDCP protected contects. ( page 27.)
Y / Pb / Pr (IN) terminals (BNC)
Input terminals for Component signal.
USB
stick, and insert to this USB socket, and operate Menu system
( Page 16.)
CVBS terminals (BNC)
Input / Output terminals for the composite signals.
AUDIO (IN) terminals (RCA)
Left and Right channels input terminals for the analog audio
signals.
Set signal source as ANALOG (CVBS, RGB, YPbPr) ,the analog
audio can be monitored as audio meters or output via Speaker /
Headphone.
Battery Plate
Install V-mount or Gold mount battery plates to power the monitor
by V-mount batteries. (Gold mount plates for option)
DC-IN terminal
Main (Back up) power input, connect with DC11V-17V 4-pin XLR
power adapter. (Pin 1: Negative, Pin 4: Positive)
AC-IN terminal
Connect the provided AC power cord to an AC outlet, with 250V
fuse.
AC Switcher
Note for connections
User a cord whose plugs correctly match the terminals on this
monitor and the equipment.
noise.
When unplugging a cord, be sure to grasp its plug and pull it
out.
DO NOT connect the power cord until all connections are
2
3
4
5
6
7
8
9
10
11
12
