About the external control
This monitor has three external control terminals.
<Serial communication>
RS-485 IN
RS-485
OUT
RS-485
IN
RS-485
OUT
RS-485
IN
RS-485
OUT
TallyMan
External Control
Using the GPI control
Using the UMD control
Pin No
Pin name
1
GPI 1
2
GPI 2
3
GPI 3
4
GPI 4
5
GPI 5
This is a female terminal.
6
GPI 6
7
NC
8
GND
To assign the functions to the pin terminals
1
Select “GPI” on the Main Menu.
2
Set “GPI control” to “ON”.
3 Select a pin name (“Pin1” – “Pin6”) for which you want to assign a
function, then select the function you want to assign.
Operation of the external control
1 Operate each function by short-circuiting the corresponding pin
terminal to the 8th pin terminal (GND) or opening it.
<Functions controlled by the GPI terminal>
Pin No
.
IN terminal signal
OUT terminal signal
1
TXD +
TXD +
2
TXD –
TXD –
3
RXD +
RXD +
4
NC
NC
5
NC
NC
6
RXD –
RXD –
7
NC
NC
8
GND
GND
This is a female terminal.
Display
Red Tally
Green Tally
Yellow Tally
Video
HDMI
SDI1
SDI2
Aspect Ratio
Scan Mode
Freeze Frame
Time code
Low Latency Mode Low Latency Mode setting
Max Backlight
Max Backlight setting
Focus Assist
Focus Assist setting
Zebra
Vector
Audio Bar
Histogram
False Color
AFD
H/V Delay
Marker
Color Bar
UMD
Audio Alarm
Color Temp
R/G/B/Mono
Flip Mode
Odd/Even Frame
Functions to be controlled
Tally light red
Tally light green
Tally light yellow
Switch to Video input display
Switch to HDMI input display
Switch to SDI-1 input display
Switch to SDI-2 input display
Changes the aspect ratio.
Changes the scan mode
Freeze Frame setting
Time code display
Zebra display
Vector display
Audio Bar display
Histogram display
False Color display
AFD display
H/V Delay display
Marker display
Color Bar display
UMD display
Audio Alarm display
Color Temp setting
R/G/B/Mono setting
Flip Mode setting
Odd/Even Mode setting
Open
Short
Red
Off
Off
Off
Green
Yellow
*1
*1
*1
*1
*2
*3
*4
*5
*5
*5
*5
*5
*5
*5
*5
*5
*5
*5
*5
*5
*5
*5
*6
*7
*8
*9
20
RS-485 terminal (RJ-45):
Controls the monitor with the RS-485 system.
The terminal is to connect with TallyMan system of UMD application.
Make contact terminal (RJ-45):
Controls the monitor by short-circuiting the corresponding pin
terminal to the GND pin terminal, or disconnecting (opening) it.
The terminal is to assign functions for GPI controlling.
Webserver IP remote control (RJ-45):
Controls the monitor by computer webpage.
*1 Short-circuit the pin to switch to the input signal.
*2 For every short-circuit contact, the Aspect ratio will change in the
order of 16:9
→
4:3
→
Auto.
*3 For every short-circuit contact, the Scan mode will change in the
order of Normal
→
Native.
*4 For every short-circuit contact, the Color temperature will change in
the order of 6500K
→
5600K
→
9300K
→
3200K.
*5 For every short-circuit contact, the value will change in the order of
On
→
Off.
*6 For every short-circuit contact, the Focus assist will change in the
order of Off
→
Red
→
Blue.
*7 For every short-circuit contact, the R/G/B/Mono will change in the
order of Off
→
Blue only
→
Red only
→
Green only
→
Mono(B&W).
*8 For every short-circuit contact, the Flip mode will change in the
order of Off
→
H Flip
→
V Flip
→
H&V Flip.
*9 For every short-circuit contact, the Odd/Even mode will change in
the order of Off
→
Odd Mode
→
Even Mode.
