12
UMD
Source ID and UMD setting
Item
Exit
Position
Size
Color
Display Type
Baud Rate
Parity
Source ID
To do
Return to Main Menu
Address setting *1
Display position setting
Size setting
Color setting
Choose Display Type *2
Baud Rate setting
Parity setting
Setting of “Source ID” *3
Setting value
Top, Bottom
Normal, Mid-Large, Large
Red, White, Black, Blue, Green, Yellow
Source ID, UMD
38400, 9600, 19200
Even, None
X X X X X X X X
1 to 126
RS485 Address
*1 Address setting
(1) The RS485 address setting is for UMD device connection.
(2) Support TSL UMD Protocol V3.1 and V4.0, provided by Television System Ltd.
(3) Set the UMD address, Baud Rate, Parity correct, to display UMD letters and Tally.
*2 Choose Display Type
(1) Select “UMD” to display Source info and Tally info from external control devices of TSL protocol,
(2) Select “Source ID” to display a user input fixed source info, and Tally info by GPI input.
*3 Source ID setting
(1) Support 8 letters to input.
(2) Press “MENU” to select each letter space, and press “ ” and “ ” to select letters from:
(3) Press “MENU” to confirm current letter and move to next space.
UMD letters and Tally1/Tally2 from external control devices
of TSL 3.1/4.0 protocol
Space 0~9 A~Z a~z &()*+,-./:<>_
CAMERA1
Tally1
UMD
Tally2
CAMERA1
Tally1
Source ID
Tally2
Source ID letters by manually input,
Tally1/Tally2 input via GPI pin assignment.
Item
Exit
GPI Control *1
1 Pin
2 Pin
3 Pin
4 Pin
5 Pin
6 Pin
Setting value
To do
Return to Main Menu
Enable GPI control
Assign functions to the GPI
terminals
ON, OFF
GPI
Setting functions for external control
Red Tally, Green Tally, Yellow Tally, Video, HDMI, SDI1, SDI2, Focus Assist,
Low Latency Mode, Odd/Even Frame , Max Backlight,Audio Alarm, UMD,
Color Bar, Marker, R/G/B/Mono, H/V Delay, AFD, False Color, Histogram,
Audio Bar, Vector,Zebra, Time Code, Color Temp, Flip Mode, Freeze Frame
Scan Mode, Aspect Ratio
*1 GPI Control
The monitor can be operated through external GPI control unit when GPI Control is turned ON. ( page 20.)
