JVC DR-M1SLB, Инструкция по эксплуатации

Страница: 21 / 116

Masterpage:Right0
Filename [DR-M1EK_06Name.fm]
Page 21 August 18, 2003 8:29 pm
21
INITIAL SETTINGS
Auto Set Up
Auto Channel Set/Auto Clock Set/
Auto Guide Program Number Set
A
Turn on the unit.
On the unit
Press
1
on the unit.
On the remote control
Press DVD
1
on the remote control.
●
The AUTO SET/T-V LINK display appears on the TV screen.
B
Perform Auto Set Up.
●
When you have connected the unit to a TV offering T-V Link
via a fully-wired 21-pin SCART cable (
墌
pg. 18) and the TV is
turned on, the unit automatically performs the Preset
Download (
墌
pg. 23) even if you select “AUTO SET” for Auto
Set Up function.
After the
1
button on the unit (or
DVD
1
on the remote
control) is pressed for the first time to turn on the unit, the
Auto Set Up function sets the tuner channels, clock and
Guide Program numbers automatically.
Before starting, make sure of the following:
●
The TV aerial cable should be connected to the unit.
●
The unit’s mains power cord should be connected to a
mains outlet.
●
Turn on the TV and select the AV mode.
●
Slide the TV/CABLE/SAT/DVD switch to DVD .
Press
rt
to move the arrow
to “AUTO SET”, then press
ENTER .
“AUTO” blinks on the front display panel; do NOT
press any button on the unit or remote control until
the front display panel shows “– –:– –” as illustrated
on page 24.
●
The AUTO SET screen will
appear.
DR-M1EK_06Name.fm Page 21 Monday, August 18, 2003 8:30 PM