JVC DR-M1SLB, Инструкция по эксплуатации

Страница: 111 / 116

Masterpage:Right-No-Heading
Filename [DR-M1EK_11Subsidiary.fm]
Page 111 August 15, 2003 7:53 pm
111
ON-SCREEN MESSAGES
MESSAGE DESCRIPTION
MEMORY IS FULL
NOTHING MORE CAN BE REGISTERED IN THE LIBRARY
IF YOU DELETE UNNECESSARY TITLE INFORMATION,
YOU CAN THEN REGISTER ADDITIONAL INFORMATION
The memory is full for registration for the Navigation system. The
recording cannot be started even though the capacity for the
recording is enough. (
墌
pg. 71)
AVAILABLE MEMORY IS LOW
SOON YOU WILL NO LONGER BE ABLE
TO REGISTER INFORMATION IN THE LIBRARY
IF YOU DELETE UNNECESSARY TITLE INFORMATION,
YOU CAN THEN REGISTER ADDITIONAL INFORMATION
The remaining capacity of the memory is not enough for
registration for the Navigation system. The recording cannot be
started even though the capacity for the recording is enough.
(
墌
pg. 71)
DISC NOT REGISTERED IN THE LIBRARY
REGISTER DISC?
A disc that is not registered in the library has been inserted.
Register the disc as necessary. (
墌
pg. 77)
INSERT DISC #XXXX Appears when a title that has been selected in the library is not
contained in the loaded disc. (
墌
pg. 76)
CAN NOT RECORD OR MAKE PLAY LIST
DELETE UNWANTED TITLES
●
Recording and/or editing cannot be performed with a loaded
DVD-RAM disc.
●
The number of titles exceeds 99.
●
The number of play lists exceeds 999.
SET CLOCK BEFORE TIMER PROGRAMMING To set the timer programme, the clock must be set in advance.
(
墌
pg. 104)
PROGRAMME FULL
DELETE UNWANTED TIMER PROGRAMME
You can programme this unit to timer-record as many as 8
programmes. To programme more, you need to cancel a timer
programme already set. (
墌
pg. 63)
CAN NOT SET DISC TIMER PROGRAMMING WITH THIS DISC
PREPARE A FORMATTED DISC AS DESCRIBED BELOW
DVD-RAM
DVD-RW (VR MODE)
On-Disc Timer Programming has been attempted when a disc
that is not compatible with the function is loaded. (
墌
pg. 60)
NO DISC INSERTED On-Disc Timer Programming has been attempted when a disc is
not loaded, or loaded upside down. (
墌
pg. 10, 60)
DISC NOT RECORDABLE
INSERT RECORDABLE DISC
When a playback-only disc or a finalised disc is loaded,
7
has
been pressed. (
墌
pg. 7, 107)
PLUSCODE NO. ERROR
CONFIRM PLUSCODE NO. THEN RETRY
An invalid PlusCode number has been input. (
墌
pg. 56)
GUIDE PROGRAMME IS NOT SET
SELECT CHANNEL YOU WANT TO RECORD
To set the timer programme using the VIDEO Plus+ system, the
Guide Program number must be set in advance. (
墌
pg. 97)
CAN NOT SET VIDEO PLUS TIMER PROGRAMMING DURING
TIMER RECORDING OR INSTANT TIMER RECORDING
CANCEL TIMER RECORDING OR
INSTANT TIMER RECORDING, THEN
ENTER THE PLUSCODE CODE AGAIN
Appears when you tried to input a PlusCode number during
timer recording or instant timer recording.
REGION CODE ERROR
CHECK DISC
A disc loaded cannot be played back on this unit since the
region number of the disc does not match that of the unit.
(
墌
pg. 7)
UNREADABLE DISC
CHECK DISC
When an incompatible disc is loaded,
4
has been pressed.
(
墌
pg. 7)
COULD NOT FORMAT THE DISC
CHECK THE DISC
Formatting is not complete since the disc may be dirty or
damaged. Take out the disc, clean it and retry. (
墌
pg. 10, 106)
COULD NOT FINALISE THE DISC
CHECK THE DISC
Finalising is not complete since the disc may be dirty or
damaged. Take out the disc, clean it and retry. (
墌
pg. 10, 107)
COULD NOT CANCEL DISC FINALISATION
CHECK THE DISC
Cancelling disc finalisation is not complete since the disc may
be dirty or damaged. Take out the disc, clean it and retry.
(
墌
pg. 10, 107)
DR-M1EK_01.book Page 111 Friday, August 15, 2003 7:53 PM