Filename [M150SEK_09Editing.fm]
Masterpage:Left+
54
EN
EDITING
To skip unwanted part of the source picture
Press
ENTER
to stop both equipment, press
I
,
N
or
O
to
locate the point where you want to resume dubbing, then press
o
.
●
Press
selection keys
to select
, then press
ENTER
to
start dubbing.
You can dub selected audio from a DVD or Audio CD disc to a
digital audio device.
However, it is not possible to dub copy-protected discs.
Example: Dubbing to an MD
1
Connect the unit and a digital audio device using an optional
coaxial cable.
2
Place a disc on the unit and load an MD on the connected
digital audio device.
3
Select the audio to be dubbed.
4
Start playback slightly before the actual point from where you
wish to start dubbing.
5
Press
W
to pause playback.
6
Select the input mode on the connected digital audio device.
7
Press
I
to start playback on the unit.
8
Start recording on the digital audio device.
9
Stop recording on the digital audio device. Then press
o
to stop
playback on the unit.
NOTE:
There may be a discrepancy of several seconds between where
you intend editing to start, and where it actually starts.
When you dub from DV equipment other than a
camcorder
A
Perform steps
1
-
3
.
B
Locate the point from where you want to start dubbing,
then stop on the DV equipment.
●
If you pause the DV equipment in this step, a few
second’s still picture will be recorded at the beginning of
the recorded programme.
C
Set the input mode to
A
DV INPUT
B
on the DV equipment.
●
If input mode is set to other than
A
DV INPUT
B
, unwanted
pictures may be recorded at the beginning of the
recorded programme.
D
Perform steps
6
and
7
.
Digital Audio Dubbing
●
Turn on the TV and select an input mode such as EXT1.
Rear of unit
Digital audio device (MD
deck, etc.)
Coaxial cable
(not supplied)
Player
Recorder
To [DIGITAL OUT (COAXIAL)]
M150SEK_00.book Page 54 Wednesday, June 15, 2005 4:04 PM
