Filename [M150SEK_07Timer Recording.fm]
Masterpage:Left+
38
EN
TIMER RECORDING
You can programme this unit to timer record as many as
8 programmes up to 30 days in advance. To perform normal timer
programming without using EPG, use the following procedure to
set your unit to timer record the programme.
1
Load a recordable disc.
●
For details, refer to
A
Placing A Disc
B
(
A
pg. 9).
2
Press
PROG
to display
the
A
PROGRAMME
CHECK
B
screen.
●
When 8 timer
programmes appear on
the TV screen, you need
to cancel some of the
reserved programmes.
3
Press
selection keys
repeatedly to select
A
NEW TIMER
PROGRAMME
B
, then
press
ENTER
.
4
Press
selection keys
to
set the desired date
(
A
DATE
B
), then press
E
.
5
Press
selection keys
to
set the desired start
time (
A
START
B
), then press
E
.
●
Each press of
F G
increases/decreases the start time in
1 minute interval.
●
To increase/decrease the start time in 30 minutes interval,
press and hold
F G
.
6
Press
selection keys
to set the desired stop time (
A
STOP
B
),
then press
E
.
●
Each press of
F G
increases/decreases the stop time in
1 minute interval.
●
To increase/decrease the stop time in 30 minutes interval, press
and hold
F G
.
7
Press
selection keys
to set the desired channel (
A
TV PROG
B
),
then press
E
.
8
Set the other recording options as required.
9
Press
ENTER
to access the Programme Confirmation screen.
10
Press
ENTER
to complete the timer programming.
●
To programme another timer, repeat steps
2
-
10
.
11
Press
TIMER
j
to engage the unit’s timer mode.
●
The unit turns off automatically and
j
appears on the front
display panel.
●
To disengage the timer mode, press
TIMER
j
again.
NOTES:
●
When two successive programmes are recorded with the
A
Manual Timer Programming
B
function, the ending of the first
programme or the beginning of the second programme may not
be recorded.
●
If the copy limited programme is received during timer recording,
the unit enters Record Pause mode. Recording starts again if it is
switched to a recordable broadcast during the time you
programmed.
Manual Timer Programming
ATTENTION:
If timer programming cannot be set or cancelled, wait for about
40 seconds and then try again.
●
Turn on the unit.
●
Turn on the TV and select an input mode such as EXT1.
●
Make sure that the unit’s built-in clock is set properly.
●
Slide the
TV/DVD
switch to
DVD
.
PROG
(
FGDE
)
ENTER
TIMER
j
AUX
DVD
TV
Selection Keys
19:00 - 20:00
22:00 - 22:30
13:30 - 14:00
16:00 - 17:00
BBCi 51
BBC 40
CBBC 30
BBC 1
PROG
PROGRAMME CHECK
++++++++++++++++++ NEW TIMER PRO+++++++++++++++++
DISC TIMER PRGM
SELECT WITH [CURSORS]
THEN PRESS [ENTER]
OK
SELECT
EXIT
05/07 SAT
SP
10/07 THU
XP
11/07 FRI
LP
WEEKLY
11/07 FRI
LP
DATE
START
TV PROG
REC MODE
DAILY/WEEKLY
STOP
LP
VTM 10
20:30
20:00
TIMER PROGRAMME
DATE
START
STOP
TV PROG
05/07 SAT
DAILY/WEEKLY
NAME
SET TIMER PROGRAMMING WITH [CURSORS]
THEN PRESS [ENTER]
REC MODE
CONFIRM
SELECT
PROG
EXIT
Satellite Receiver Users
To record a satellite broadcast using Manual Timer
Programming:
A
Perform Manual Timer Programming.
●
In step
7
, press
AUX
to set
A
TV PROG
B
to
A
SAT
B
. Then press
F G
to enter the channel position for the satellite broadcast.
B
Set the satellite receiver to the appropriate channel for
recording.
●
Leave the satellite receiver’s power on.
M150SEK_00.book Page 38 Wednesday, June 15, 2005 4:04 PM