Filename [M150SEK_06DVD Operation.fm]
Masterpage:Left+
32
EN
BASIC OPERATIONS ON DVD DECK
Time Search
You can play back a disc from the desired point by specifying the
elapsed playing time from the beginning of a programme
(DVD-RAM, DVD-R, DVD-RW and DVD VIDEO) or a disc (Video
CD/SVCD and Audio CD).
1
Press
ON SCREEN
twice to access the on-screen bar.
2
Press
selection keys
to select
A
j9
B
, then press
ENTER
. The
DVD-VIDEO
:
:
CINEMA
AUTO 1
TIME
ENTER
pop-up window appears under the selected item.
3
Press the
number keys
to enter the desired time, then press
ENTER
. Playback starts from the specified time.
Example:
To play back from a point 12 (minutes): 50 (seconds) elapsed.
If you have specified a wrong number
Press
CLEAR
(
o
) or
CANCEL
on the remote control and re-enter
again.
To clear the on-screen bar
Press
ON SCREEN
.
NOTES:
●
When
A
7
B
is displayed on the TV screen in step
3
, you have
selected a point that exceeds the recording time of the disc.
●
Some DVD VIDEO discs do not contain time information, and it is
not possible to use the Time Search function. In such cases,
A
7
B
is displayed on the TV screen as well.
●
This function is not possible for a Video CD/SVCD with PBC
function.
Adjusting The Picture Quality
You can obtain optimal picture quality by selecting an appropriate
picture mode.
1
Press
ON SCREEN
twice to access the on-screen bar.
2
Press
selection keys
to select
A
B
, then press
ENTER
. The
DVD-VIDEO
NORMAL
CINEMA
SHARP
SOFT
CINEMA
AUTO 1
pop-up window appears under the selected item.
3
Press
selection keys
to select the desired option, then press
ENTER
.
NORMAL
:
Normally select this.
CINEMA
:
Suitable for a movie disc, etc.
SHARP
:
Clearer, sharper-edged picture when viewing images with lots
of flat, same-coloured surfaces such as cartoons.
SOFT
:
Select this option when too much noise appears.
To clear the on-screen bar
Press
ON SCREEN
.
Setting The Progressive Mode
You can obtain optimal picture quality by selecting whether the
content on the disc is processed by field (video source) or by frame
(film source).
1
Set the unit to the progressive scan mode. (
A
pg. 63)
2
Press
ON SCREEN
twice to access the on-screen bar.
3
Press
selection keys
to select
A
B
, then press
ENTER
. The
DVD-VIDEO
AUTO 1
AUTO 2
FILM
VIDEO
SHARP
AUTO 2
pop-up window appears under the selected item.
4
Press
selection keys
to select the desired option, then press
ENTER
.
AUTO 1
:
This mode automatically detects film and video content for
progressive playback. When film content is found, flag detection
is used to invoke playback of film data in full screen. When
video content is found, pictures from multiple fields are used to
detect sections with movement, and then this movement
undergoes advanced image processing for output of sharp,
detailed progressive images without any reduction in image
quality where movement occurs. Normally, operation in this
mode is recommended.
AUTO 2
:
Only the processing of sections with movement differs from
A
AUTO 1
B
.
For video contents, the sections with movement are detected
and the pictures are corrected by the filtering process for motion
pictures.
FILM
:
Suitable for playing back a progressive scanned film source disc.
T
(
FGDE
)
CANCEL
ENTER
ON SCREEN
S
0-9
I
CLEAR (
o
)
Selection Keys
TIME
TIME
TIME
TIME
TIME
Press 1
Press 5
Press 2
Press 0
M150SEK_00.book Page 32 Wednesday, June 15, 2005 4:04 PM
