Masterpage:Right+
EN
39
Filename [M150SEK_07Timer Recording.fm]
TIMER RECORDING
On-Disc Timer Programming is a function used with discs that are
especially intended for a specific programme. The disc is then
programmed for a programme you always watch every day or
every week. Since older programmes are automatically
overwritten, a single disc can be used without worrying about how
much recording capacity remains. You can programme each disc
to timer record as many as 8 programmes up to 30 days in
advance.
To Make The Disc For On-Disc Timer Programming
1
Press
PROG
to access
the Programme Check
screen.
2
Press
selection keys
to
select
A
DISC TIMER
PRGM
B
, then press
ENTER
.
●
When some
programmes are
recorded on the disc, a
caution message
appears. You can either format the disc (
A
pg. 67) or insert a
new disc, then re-perform the procedure from step
1
.
●
When On-Disc Timer Programming has already been made on
the disc, press
selection keys
to select
A
NEW TIMER
PROGRAMME
B
, then press
ENTER
.
3
Press
selection keys
to
set the desired date
(
A
DATE
B
), then press
E
.
4
Press
selection keys
to
set the desired start time
(
A
START
B
), then press
E
.
●
Each press of
F G
increases/decreases the
start time in 1 minute
interval.
●
To increase/decrease the
start time in 30 minutes interval, press and hold
F G
.
5
Press
selection keys
to set the desired stop time (
A
STOP
B
),
then press
E
.
●
Each press of
F G
increases/decreases the stop time in
1 minute interval.
●
To increase/decrease the stop time in 30 minutes interval, press
and hold
F G
.
6
Press
selection keys
to set the desired channel (
A
TV PROG
B
),
then press
E
.
7
Press
selection keys
to set
A
DAILY/WEEKLY
B
, then press
E
.
●
For details on
A
DAILY/WEEKLY
B
setting, refer to
A
Daily/Weekly
Recording Function
B
(
A
pg. 37).
8
Set the other recording
options as required.
●
A
Recording Mode
B
(
A
pg. 34)
●
A
Modify Title Name
B
(
A
pg. 46)
9
Press
ENTER
to access
the Programme
Confirmation screen.
10
Press
ENTER
to
complete
A
To Make The Disc For On-Disc Timer
Programming
B
.
●
To programme another timer using
A
To Make The Disc For On-
Disc Timer Programming
B
, repeat steps
1
-
10
.
11
Press
DVD
A
to turn off the power.
●
is displayed on the front display panel.
●
To disengage the timer mode, press
DVD
A
again.
On-Disc Timer Programming
●
Make sure that the unit’s built-in clock is set properly.
●
Turn on the TV and select an input mode such as EXT1.
●
Load a DVD-RAM or DVD-RW (VR mode) disc for
programming.
●
Slide the
TV/DVD
switch to
DVD
.
ATTENTION:
●
On-Disc Timer Programming is possible only with the disc for
On-Disc Timer Programming.
●
If data is recorded on a disc for On-Disc Timer Programming
using a unit from another manufacturer, On-Disc Timer
Programming may not function properly.
●
If timer programming cannot be set or cancelled, wait for about
40 seconds and then try again.
(
FGDE
)
ENTER
PROG
DVD
A
AUX
DVD
TV
Selection Keys
Satellite Receiver Users
To timer record a satellite broadcast using On-Disc Timer
Programming:
A
Perform On-Disc Timer Programming.
●
In step
6
, press
AUX
to set
A
TV PROG
B
to
A
SAT
B
. Then press
F G
to enter the channel position for the satellite broadcast.
B
Set the satellite receiver to the appropriate channel for
recording.
●
Leave the satellite receiver’s power on.
PROGRAMME CHECK
DISC TIMER PRGM
SELECT WITH [CURSORS]
THEN PRESS [ENTER]
OK
SELECT
PROG
EXIT
++++++++++++++++++ NEW TIMER PRO+++++++++++++++++
DATE
START
TV PROG
REC MODE
DAILY/WEEKLY
STOP
LP
DISC TIMER PRGM
DATE
START
STOP
TV PROG
05/07 SAT
DAILY/WEEKLY
NAME
SET TIMER PROGRAMMING WITH [CURSORS]
THEN PRESS [ENTER]
WEEKLY
REC MODE
CONFIRM
SELECT
PROG
EXIT
LP
YORN 1
20:30
18:30
DISC TIMER PRGM
DATE
START
STOP
TV PROG
05/07 SAT
DAILY/WEEKLY
NAME
SET TIMER PROGRAMMING WITH [CURSORS]
THEN PRESS [ENTER]
WEEKLY
REC MODE
CONFIRM
SELECT
PROG
EXIT
M150SEK_00.book Page 39 Wednesday, June 15, 2005 4:04 PM
