JVC DM-NC40 Скачать руководство пользователя страница 16 | Manualshive

Страница: 16 / 60

background image

16

1-1 Connection Examples

(Continued)

Step 1 Connection/Installation

(Continued)

Caution when connecting different modes

For teleconference application, set units to Teleconference mode. For remote monitoring application, set units to Camera/Monitor
mode. Connecting units in different application modes will result some problems as following:

Teleconference mode - Monitor mode

Teleconference side: Audio of the monitor side is played back. Video will not be played back.
Monitor side: Video and audio of the teleconference side are played back.

Teleconference mode - Camera mode

Teleconference side: Video and audio of the camera are played back.
Camera side: Audio of the teleconference side is played back.

Teleconference mode - ISMA Server mode

Teleconference side: Video is played back and audio will be noise.
Streaming side: No playback

Monitor mode - ISMA Server mode

Monitor side: Video is played back and audio will be noise.
Streaming side: No playback

Camera mode - ISMA Server mode

Camera side: Audio will be noise.
Streaming side: No playback

Monitor mode - Monitor mode

Only audio will be played back.

Camera mode - Camera mode

Only audio will be played back.

Observing the video and audio using another DM-NC40 unit (observer mode)

Observing stream is available by connecting another DM-NC40 unit to working DM-NC40.

•

Camera mode accepts observing at the time of shipment. For teleconference mode, a setting change using

API is required to accept observing. (

Page 54)

Remote Monitoring system (Camera mode and Monitor mode)

Observing is available by connecting from Monitor mode to Camera mode that is connected already to another Monitor

mode.

(At this time, ENCODE display lamp: OFF, DECODE display lamp: ON, SELECT button light: OFF (operation disabled),

PinP button light: OFF (operation disabled) on the observing unit.)

* The automatic recovery feature does not work with observing unit. Please reconnect.

Teleconference system (Teleconference mode and Teleconference mode)

After observing is enabled by API, observing is available by connecting from teleconference mode to teleconference

mode that is connected already to another teleconference mode.

(At this time, ENCODE display lamp: OFF, DECODE display lamp: ON, SELECT button light: OFF (operation disabled),

PinP button light: OFF (operation disabled) on the observing unit.)

When connecting different modes

See “Caution when connecting different modes”, above.

«
...
14
15
16
17
18
...
»

Содержание DM-NC40





























































Отзывы:

Нет отзывов

Похожие инструкции для DM-NC40

Бренд: Magnum Energy Страницы: 2

Бренд: Magnum Energy Страницы: 62

Бренд: Galaxy Audio Страницы: 6

Бренд: YMGI Страницы: 64

Бренд: Patton electronics Страницы: 16

H0FL-EthMux.SA1601

Бренд: Huahuan Electronics Страницы: 55

Бренд: ICP DAS USA Страницы: 8

Бренд: Vanner Страницы: 28

Pocket Inverter 100

Бренд: XPower Страницы: 38

EASI ATM IND2x2 Series

Бренд: Teleste Страницы: 28

Бренд: Elation Страницы: 4

Бренд: Transition Networks Страницы: 5

Бренд: Tripp Lite Страницы: 4

Бренд: Saftronics Страницы: 101

Бренд: Uclan Страницы: 36

Бренд: Pro-Ject Audio Systems Страницы: 3

Бренд: SMA Страницы: 48

Бренд: Intellinet Страницы: 16

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды