Juniper SRX550, Руководство по оборудованию

Страница: 79 / 220

process begins whenever a services gateway is powered on and cannot locate a valid configuration file in
the CompactFlash. Typically, a configuration file is unavailable when a services gateway is powered on for
the first time or if the configuration file is deleted from the CompactFlash. The autoinstallation feature
enables you to deploy multiple services gateways from a central location in the network.
If you are setting up many services gateways, autoinstallation can help automate the configuration process
by loading configuration files onto new or existing devices automatically over the network. You can use
the CLI to configure a services gateway for autoinstallation. The J-Web interface does not include pages
for the autoinstallation feature.
For the autoinstallation feature to work, you must store one or more host-specific or default configuration
files on a configuration server in the network and have a service available—typically Dynamic Host
Configuration Protocol (DHCP)—to assign an IP address to the services gateway.
Autoinstallation begins automatically when you connect to the Ethernet port labeled 0/0 (interface
ge-0/0/0) on a new services gateway connected to the network and power on the services gateway. To
simplify the process, you can explicitly enable autoinstallation on a services gateway and specify a
configuration server, an autoinstallation interface, and a protocol for IP address acquisition.
NOTE: Autoinstallation is enabled on all ports of the services gateway. If you do not want to
use the autoinstallation feature, you must delete it using the CLI. For more information about
the autoinstallation feature, see the Initial Configuration for Security Devices .
RELATED DOCUMENTATION
Installation Overview for the SRX550 Services Gateway | 60
Required Tools and Parts for Installing the SRX550 Services Gateway | 61
Grounding the SRX550 Services Gateway | 77
SRX550 Services Gateway Basic Connectivity Overview | 95
63