Juniper SRX550, Руководство по оборудованию

Страница: 67 / 220

RELATED DOCUMENTATION
General Site Installation Guidelines for the SRX550 Services Gateway | 35
Maintaining the SRX550 Services Gateway Power Supply | 123
SRX550 Services Gateway Power Requirements | 54
SRX550 Services Gateway Environmental Specifications | 36
SRX550 Services Gateway Supported AC Power Cords
WARNING: The AC power cord for the services gateway is intended for use with the
services gateway only and not for any other use.
NOTE: In North America, AC power cords must not exceed 4.5 m (approximately 14.75 ft) in
length, to comply with National Electrical code (NEC) Section 400-8 (NFPA 75, 5-2.2) and 210-52,
and Canadian Electrical Code (CEC) Section 4-010(3).
Table 15 on page 51 provides power cord specifications, and Figure 13 on page 52 depicts the plug on
the AC power cord provided for each country or region.
Table 15: AC Power Cord Specifications
Plug Standards Electrical Specification Country
AS/NZ 3112-1993 250 VAC, 10 A, 50 Hz Australia
GB2099.1 1996 and
GB 1002 1996
(CH1-10P)
250 VAC, 10 A, 50 Hz China
CEE (7) VII 250 VAC, 10 A, 50 Hz Europe (except Italy and United Kingdom)
CEI 23-16/VII 250 VAC, 10 A, 50 Hz Italy
JIS 8303 125 VAC, 12 A, 50 or 60
Hz
Japan
NEMA 5-15 125 VAC, 10 A, 60 Hz North America
51