Juniper SRX550, Руководство по оборудованию

Страница: 130 / 220

Table 32: Configuring Basic Settings (continued)
Using the CLI Using the J-Web Setup Wizard
Required or
Optional Task
Specify the time zone. For
example:
set time-zone
America/Los_Angeles
1. From the Configure System:
Time page, click Reset Manually
to reset the time.
2. From the Time Zone list, select
the time zone for your services
gateway; for example,
America/Los_Angeles
Optional Define the current
system time and time
zone in which the
services gateway is
located.
Specify the address of the
NTP server. For example:
set ntp server 10.148.2.21
From the Configure System: Time
page, in the NTP Servers field, type
the NTP server's IP address; for
example, 10.148.2.21.
Optional Define the NTP server
that the services
gateway can reach to
synchronize the system
time.
Commit and save your
configuration. For example:
commit
Review the configuration on the
Review & Commit page. Click
Commit to save the configuration,
or click Back to make changes.
Required Commit the
configuration.
NOTE: After basic setup is configured, the J-Web setup wizard will no longer be available unless
you reset the services gateway to the factory default settings and reboot it. You can perform
additional setup by using the J-Web interface or the CLI interface. You can use wizards to
configure basic firewall policies, VPN settings, and NAT rules. For more information about these
wizards, see the Security Basics .
For detailed instructions on managing users and operations, monitoring network performance, upgrading
software, and diagnosing common problems on an SRX550 Services Gateway, see the Monitoring and
Troubleshooting for Security Devices .
RELATED DOCUMENTATION
Connecting to the SRX550 Services Gateway from the CLI Remotely | 104
Configuring the Modem at the SRX550 Services Gateway End | 85
Connecting the Modem to the Console Port on the SRX550 Services Gateway | 80
114