Juniper NFX150, Руководство по оборудованию

Страница: 79 / 152

See Also Console Port Connector Pinouts for NFX150 Devices on page 57
•
Connecting an NFX150 Device to a Management Console Using Mini-USB Type-B Console Port
You can configure and manage NFX150 devices by using the RJ-45 console port or the
Mini-USB Type-B console port. However, the console input will be active only on one
port at a time—only one port will be set active at a time.
By default, the RJ-45 port is set as an active console port and the Mini-USB Type-B port
is the passive console port.
If your laptop or PC does not have a DB-9 male connector pin or RJ-45 connector pin,
you can connect your laptop or PC directly to an NFX150 device by using a mini-USB
cable that has a Standard-A USB connector on one end and a Mini-USB Type-B (5 pin)
connector on the other end.
This section describes the process of connecting an NFX150 device to the management
console by using the Mini-USB Type-B console port.
For information about configuring and managing an NFX150 device by using the RJ-45
console port, see
“Connecting an NFX150 Device to a Management Console” on page 78 .
Before you begin connecting an NFX150 device by using the Mini-USB Type-B console
port:
•
Ensure that the USB to Serial driver is installed on the host machine. You can download
the driver from
https://webdownload.juniper.net/swdl/dl/secure/site/1/record/5029.html
• Ensure that the hyper terminal properties of the console server or laptop are set as
follows:
•
Baud rate—9600
•
Flow control—None
• Data—8
• Parity—None
•
Stop bits—1
•
DCD state—Disregard
Ensure that you have the following parts and tools available:
79 Copyright © 2018, Juniper Networks, Inc.
Chapter 3: Initial Installation and Configuration