Juniper NFX150, Руководство по оборудованию

Страница: 66 / 152

•
Verify that the site meets the requirements described in “Site Preparation Checklist
for NFX150 Devices” on page 41 .
• Place the desk in its permanent location, allowing adequate clearance for airflow and
maintenance, and secure it to the building structure.
•
Read “General Safety Guidelines and Warnings” on page 117 , with particular attention
to “Chassis Lifting Guidelines for NFX150 Devices” on page 123 .
• Ensure that you have the 4 rubber feet to stabilize the chassis on the a desk or other
level surface (provided in the accessory box in the device carton)
To mount an NFX150-C-S1 device on a desk or other level surface:
1.
Remove the device from the shipping carton (see “Unpacking an NFX150 Device” on
page 61 ).
2.
Turn the chassis upside down on the desk or the level surface where you intend to
mount the device.
3.
Attach the rubber feet to the bottom of the chassis as shown in Figure 20 on page 66
4.
Turn the chassis right side up on the desk or the level surface.
Figure 20: Attaching Rubber Feet to the NFX150-C-S1 Device
g100025
5.
Attach the antennas to the antenna base of compact models such as NFX150-C-S1-AA
and NFX150-C-S1-AE with integrated LTE modem support. See
Figure 21 on page 67 .
Copyright © 2018, Juniper Networks, Inc. 66
NFX150 Network Services Platform Hardware Guide