Juniper NFX150, Руководство по оборудованию

Страница: 115 / 152

4.
Have one person support the weight of the device while another person unscrews and
removes the mounting screws.
5.
Remove the device from the rack or cabinet (see “Chassis Lifting Guidelines for NFX150
Devices” on page 123 ) and place the device in an antistatic bag.
6.
Place the device in the shipping carton.
7.
Place the packing foam on top and around the device.
8.
If you are returning accessories or FRUs with the device, pack them as instructed in
“Packing an NFX150 Device or Component for Shipping” on page 114 .
9.
Replace the accessory box on top of the packing foam.
10.
Close the top of the cardboard shipping box and seal it with packing tape.
11.
Write the RMA number on the exterior of the box to ensure proper tracking.
Packing NFX150 Device Components for Shipping
CAUTION: Do not stack the NFX150 device components. Return individual
components in separate boxes if they do not fit together on one level in the
shipping box.
To pack and ship NFX150 device components:
•
Place individual FRUs in antistatic bags.
•
Ensure that the components are adequately protected with packing materials and
packed so that the pieces are prevented from moving around inside the carton.
• Close the top of the cardboard shipping box and seal it with packing tape.
•
Write the RMA number on the exterior of the box to ensure proper tracking.
See Also
•
Returning a NFX150 Device or Component for Repair or Replacement on page 112
115 Copyright © 2018, Juniper Networks, Inc.
Chapter 6: Contacting Customer Support and Returning the Chassis or Components