Juniper NFX150, Руководство по оборудованию

Страница: 93 / 152

user@host# run show modem wireless network
user@host# run show interfaces dl0.0
Configuring the LTE Expansion Module for Backup Mode
You can configure the LTE expansion module as a backup interface. If the primary interface
fails, the LTE expansion module connects to the network and remains online only until
the primary interface becomes functional. The dialer interface is enabled only when the
primary interface fails.
To configure the LTE expansion module as a backup interface:
1.
Configure the dialer interface:
user@host# set interfaces dl0 unit 0 family inet negotiate-address
user@host# set interfaces dl0 unit 0 family inet6 negotiate-address
user@host# set interfaces dl0 unit 0 dialer-options pool
dialer-pool-number
user@host# set interfaces dl0 unit 0 dialer-options dial-string dial-number
2.
Configure the dialer pool for the LTE physical interface:
user@host# set interfaces cl-1/1/0 dialer-options pool dialer-pool-number
NOTE: The
dialer-pool-number
is always 1 as there is only one LTE interface
on the NFX150.
3.
Configure the profile.
user@host# run request modem wireless create-profile profile-id profile-id cl-1/1/0 slot
sim-slot-number access-point-name l3vpn.corp authentication-method none
NOTE:
sim-slot-number
is the slot on the LTE expansion module in which
the SIM card is inserted.
4.
Verify that the profile is configured successfully:
user@host# run show modem wireless profiles cl-1/1/0 slot 1
5.
Activate the SIM card:
user@host# set interfaces cl-1/1/0 act-sim sim-slot-number
6.
Select the profile and configure the radio access type for the SIM card:
user@host# set interfaces cl-1/1/0 cellular-options sim sim-slot-number select-profile profile-id
profile-id
user@host# set interfaces cl-1/1/0 cellular-options sim sim-slot-number radio-access
automatic
93 Copyright © 2018, Juniper Networks, Inc.
Chapter 3: Initial Installation and Configuration