Juniper NFX150, Руководство по оборудованию

Страница: 114 / 152

Figure 48: Location of the Serial Number ID Label on an NFX150 Device
g100034
Serial number ID label
See Also Contacting Customer Support to Obtain a Return Materials Authorization for an NFX150
Device on page 111
•
Packing an NFX150 Device or Component for Shipping
If you are returning a NFX150 device or component to Juniper Networks for repair or
replacement, pack the item as described in this topic.
Before you pack a NFX150 device or component:
• Ensure that you have taken the necessary precautions to prevent electrostatic discharge
(ESD) damage. See
“Prevention of Electrostatic Discharge Damage” on page 142 .
•
Retrieve the original shipping carton and packing materials. Contact your JTAC
representative if you do not have these materials, to learn about approved packing
materials. See
“Contacting Customer Support to Obtain a Return Materials Authorization
for an NFX150 Device” on page 111 .
Ensure that you have the following parts and tools available:
• ESD grounding strap.
•
Antistatic bag, one for each component.
•
If you are returning the chassis, an appropriate screwdriver for the mounting screws
used on your rack or cabinet.
This topic describes:
• Packing a NFX150 Device for Shipping on page 114
• Packing NFX150 Device Components for Shipping on page 115
Packing a NFX150 Device for Shipping
To pack a NFX150 device for shipping:
1.
Power down the NFX150 device and remove the power cables. See “Powering off an
NFX150 Device” on page 104 .
2.
Remove the cables that connect the device to all external devices.
3.
Remove all field-replaceable units (FRUs) from the NFX150 device.
Copyright © 2018, Juniper Networks, Inc. 114
NFX150 Network Services Platform Hardware Guide