Juniper NFX150, Руководство по оборудованию

Страница: 78 / 152

See Also NFX150 Chassis on page 24
•
•
Connecting an NFX150 Device to a Management Console on page 78
Connecting an NFX150 Device to a Management Console
NFX150 device has a console port with an RJ-45 connector. Use the console port to
connect the device to a management console or to a console server.
Ensure that you have an RJ-45 to DB-9 rollover cable available. An RJ-45 cable with an
RJ-45 to DB-9 adapter is provided with the device.
NOTE: If your laptop or PC does not have a DB-9 male connector pin and you
want to connect your laptop or PC directly to the NFX150 device, use a
combination of the RJ-45 cable and RJ-45 to DB-9 adapter supplied with the
device and a USB to DB-9 male adapter. You must provide the USB to DB-9
male adapter.
To connect the NFX150 device to a management console (see Figure 34 on page 78 and
Figure 35 on page 78 ):
1.
Connect one end of the Ethernet cable to the console port (labeled
CON
).
2.
Connect the other end of the Ethernet cable into the console server (see
Figure 34 on page 78 ) or management console (see Figure 35 on page 78 ).
Figure 34: Connecting the NFX150 Device to a Management Console Through a Console
Server
Figure 35: Connecting the NFX150 Device Directly to a Management Console
Copyright © 2018, Juniper Networks, Inc. 78
NFX150 Network Services Platform Hardware Guide