Juniper NFX150, Руководство по оборудованию

Страница: 57 / 152

Table 27: Mini-USB Type-B Console Port Pinout Information for NFX150 Devices (continued)
Description Signal Pin
May be N/C, GND or used as an attached device presence indicator N/C X
Ground GND 4
See Also NFX150 Device Hardware Overview on page 19
•
Console Port Connector Pinouts for NFX150 Devices
The console port (labeled
CON
) is an RS-232 serial interface that uses an RJ-45 connector
to connect to a console management device. The default baud rate for the console port
is 9600 baud.
Table 28 on page 57 provides the pinout information for the RJ-45 console connector.
An RJ-45 cable and RJ-45 to DB-9 adapter are supplied with the NFX150 device.
NOTE: If your laptop or PC does not have a DB-9 male connector pin and you
want to connect your laptop or PC directly to an NFX150 device, use a
combination of the RJ-45 cable and RJ-45 to DB-9 adapter supplied with the
device and a USB to DB-9 male adapter. You must provide the USB to DB-9
male adapter.
Table 28: Console Port Connector Pinouts for the NFX150 Device
Description Signal Pin
Request to send RTS Output 1
Data terminal ready DTR Output 2
Transmit data TxD Output 3
Signal ground Signal Ground 4
Signal ground Signal Ground 5
Receive data RxD Input 6
Data carrier detect DCD Input 7
Clear to send CTS Input 8
See Also Connecting an NFX150 Device to a Management Console on page 78
•
57 Copyright © 2018, Juniper Networks, Inc.
Chapter 2: Site Planning, Preparation, and Specifications