Jungheinrich ETVC 16, Руководство по эксплуатации

Страница: 64 / 89

F 7
120
7.GB
5.1 Fuels, coolants and lubricants
Handling consumption type material: Consumption type material must always be
handled properly. Manufacturer's instructions to be observed.
F
Improper handling is injurious to health, life, and environment. Consumption type ma-
terials must be stored in adequate containers. They might be inflammable and, the-
refore, must not come into contact with hot components or open fire.
When filling in consumption type materials use clean containers only. It is prohibited
to mix consumption type materials of different grades or qualitiies resp., except if mi-
xing is expressively prescribed in these operating instructions. Avoid spilling. Spilt li-
quid must be removed immediately using a suitable binding agent, and the mixture of
consumption type material and binding agent is to be disposed of according to the re-
gulations.
Grease data
5.2 Reservoir filling level
Code Order-no. Supply Qty Designation Used for
A 50 449 669 5,0 l HLP-D 46, DIN 51524 Hydraulic system
B 29 200 680 5,0 l CLP 100, DIN 51517 Transmission
C 29 200 810 5,0 l HLP 10, DIN 51524 Transmission
D 29 200 150 1,0 l Brake fluid Brake system
E 29 201 430 1,0 kg Grease, DIN 51825 Lubrication
F 50 430 702 1,0 kg Grease, TTF52 Lubrication
G 29 201 280 400 ml Chain spray Chains
J 29 202 020 5,0 l Aero Shell Fluid 41 Hydraulic system
Code Saponification Dropp. point
°C
Worked penetr.
at 25 °C
NLG1
class
Service
temperat.
°
C
E Lithium 185 265-295 2 -35/+120
F -- -- 310-340 1 -52/+100
Marking
Top level
Litres Lift heights (h
3) in mm
ZT 1,6 t DZ 1,6 t DZ 2,0 t
6 Approx. 26,5 - - Up to 7400
3 Approx. 23 Up to 4400 Up to 6500 Up to 5600
2 Approx. 20 Up to 3800 Up to 5000 Up to 4700
1 Approx. 16 - -
F 7
120
7.GB
5.1 Fuels, coolants and lubricants
Handling consumption type material: Consumption type material must always be
handled properly. Manufacturer's instructions to be observed.
F
Improper handling is injurious to health, life, and environment. Consumption type ma-
terials must be stored in adequate containers. They might be inflammable and, the-
refore, must not come into contact with hot components or open fire.
When filling in consumption type materials use clean containers only. It is prohibited
to mix consumption type materials of different grades or qualitiies resp., except if mi-
xing is expressively prescribed in these operating instructions. Avoid spilling. Spilt li-
quid must be removed immediately using a suitable binding agent, and the mixture of
consumption type material and binding agent is to be disposed of according to the re-
gulations.
Grease data
5.2 Reservoir filling level
Code Order-no. Supply Qty Designation Used for
A 50 449 669 5,0 l HLP-D 46, DIN 51524 Hydraulic system
B 29 200 680 5,0 l CLP 100, DIN 51517 Transmission
C 29 200 810 5,0 l HLP 10, DIN 51524 Transmission
D 29 200 150 1,0 l Brake fluid Brake system
E 29 201 430 1,0 kg Grease, DIN 51825 Lubrication
F 50 430 702 1,0 kg Grease, TTF52 Lubrication
G 29 201 280 400 ml Chain spray Chains
J 29 202 020 5,0 l Aero Shell Fluid 41 Hydraulic system
Code Saponification Dropp. point
°C
Worked penetr.
at 25 °C
NLG1
class
Service
temperat.
°
C
E Lithium 185 265-295 2 -35/+120
F -- -- 310-340 1 -52/+100
Marking
Top level
Litres Lift heights (h
3) in mm
ZT 1,6 t DZ 1,6 t DZ 2,0 t
6 Approx. 26,5 - - Up to 7400
3 Approx. 23 Up to 4400 Up to 6500 Up to 5600
2 Approx. 20 Up to 3800 Up to 5000 Up to 4700
1 Approx. 16 - -