Jungheinrich ETVC 16, Руководство по эксплуатации

Страница: 47 / 89

1005
.G
B
E 14
4.5 Picking up, lifting and transporting of loads
– Tilt the control lever (1) in the V or the R direction to bring the fork tines into a hori-
zontal position.
– Move the truck up to the load.
– Tilt the control lever (2) in the T direction to push the mast holder forward.
– Pull the solo-pilot (3) in the H direction to lift the fork tines to the appropriate height.
– Move the fork tines under the load.
– Pull the solo-pilot (3) in the H direction to lift the load clear.
– Tilt the control lever (2) in the U direction to retract the mast holder.
F
Transport runs with or without load must only be performed with the mast holder re-
tracted, the hoist frame tilted backwards and the load lifting device lowered.
– Press the solo-pilot (3) in the S dir. to lower the load to the transport position.
– Pull the control lever in the R direction to tilt the load backward.
– Transport the load to the required location.
– Press the control lever (1) in the V direction to bring the load into the horizontal po-
sition.
– Bring load to the desired height: Pull the solo-pilot (3) the H direction, if necessary,
tilt the control lever (2) the T direction in order to extraxt the mast holder.
– Press the solo-pilot (3) in the S direction to set down the load.
– Pull the control lever (2) in the U direction to retract the mast holder.
1005
.G
B
E 14
4.5 Picking up, lifting and transporting of loads
– Tilt the control lever (1) in the V or the R direction to bring the fork tines into a hori-
zontal position.
– Move the truck up to the load.
– Tilt the control lever (2) in the T direction to push the mast holder forward.
– Pull the solo-pilot (3) in the H direction to lift the fork tines to the appropriate height.
– Move the fork tines under the load.
– Pull the solo-pilot (3) in the H direction to lift the load clear.
– Tilt the control lever (2) in the U direction to retract the mast holder.
F
Transport runs with or without load must only be performed with the mast holder re-
tracted, the hoist frame tilted backwards and the load lifting device lowered.
– Press the solo-pilot (3) in the S dir. to lower the load to the transport position.
– Pull the control lever in the R direction to tilt the load backward.
– Transport the load to the required location.
– Press the control lever (1) in the V direction to bring the load into the horizontal po-
sition.
– Bring load to the desired height: Pull the solo-pilot (3) the H direction, if necessary,
tilt the control lever (2) the T direction in order to extraxt the mast holder.
– Press the solo-pilot (3) in the S direction to set down the load.
– Pull the control lever (2) in the U direction to retract the mast holder.