Jungheinrich ETVC 16, Руководство по эксплуатации

Страница: 29 / 89

020
5.GB
D 2
3 Exposing the battery
– Sit on the driver´s seat.
– Render the truck ready for operation (refer to chapter E).
– Tilt the control lever (1) in direction of arrow (U), drive mast holder to its limit stop
position towards the battery and release control lever (1) (mast is in final position).
– Tilt the control lever (1) once again in direction of arrow (U) and go on driving mast
holder to its limit stop position towards the battery (preparation of battery unlok-
king).
– Actuate the battery trolley unlocking system (4). The LED (2) lights up.
– Tilt the control lever (1) in the T direction and push the mast holder with the coupled
battery trolley forward until the battery is exposed for servicing.
– Switch off the master switch and the key switch.
F
Connecting and disconnecting of battery connector and socket is permitted only with
the master switch and battery charger switched off.
– Withdraw the battery connector (5) from the socket.
– Remove any insulating matting from the batteries.
Z
The safety switch of the battery unlocking system interrupts the driving function as
long as the battery trolley is unlocked and the LED (2) is lit. Before commissioning the
truck again, the battery trolley must be returned to the original position to uncouple
the battery trolley and the mast holder. The LED (2) must have gone out.
1
2
5
4
3
020
5.GB
D 2
3 Exposing the battery
– Sit on the driver´s seat.
– Render the truck ready for operation (refer to chapter E).
– Tilt the control lever (1) in direction of arrow (U), drive mast holder to its limit stop
position towards the battery and release control lever (1) (mast is in final position).
– Tilt the control lever (1) once again in direction of arrow (U) and go on driving mast
holder to its limit stop position towards the battery (preparation of battery unlok-
king).
– Actuate the battery trolley unlocking system (4). The LED (2) lights up.
– Tilt the control lever (1) in the T direction and push the mast holder with the coupled
battery trolley forward until the battery is exposed for servicing.
– Switch off the master switch and the key switch.
F
Connecting and disconnecting of battery connector and socket is permitted only with
the master switch and battery charger switched off.
– Withdraw the battery connector (5) from the socket.
– Remove any insulating matting from the batteries.
Z
The safety switch of the battery unlocking system interrupts the driving function as
long as the battery trolley is unlocked and the LED (2) is lit. Before commissioning the
truck again, the battery trolley must be returned to the original position to uncouple
the battery trolley and the mast holder. The LED (2) must have gone out.
1
2
5
4
3