Jungheinrich EFG-Vac 22, Руководство по эксплуатации, Страница: 70 / 81

F 5
508
2973
- 501
1633
3 GB
Maintenance intervals
Standard =
t
W M M M
1 6 12 24
Electr.
system: 7.1 Check function of instruments and indicators
t
7.2 Check cables for secure connection and damage
t
7.3 Check cable guides for function and damage
t
7.4 Check the warning devices and safety circuits for correct
function
t
7.5 Check contactor
t
7.6 Check fuses for correct amperage
t
7.7 Clean installation space of electronics and cooling fins
t
7.8 Read out and clear error memory
t
Electric
motors: 8.1 Check the motor for secure attachment
t
8.2 Check fan for correct function
t
8.3 Clean motor cooling fins
t
Battery: 9.1 Check battery cables for damage and replace, if
necessary
t
9.2 Check acid density, acid level, and cell voltage
t
9.3 Check terminals for secure attachment and apply
grease
t
9.4 Clean battery plug connections, check for tight seat
t
Lifting mast: 10.1 Apply lubricating grease to slide way and lateral
stopping face of the guide rollers in the lifting mast
profiles.
t
10.2 Check lifting chains for wear and adjust.
t
10.3 Grease lifting chains and check tension.
t
10.4 Check lifting mast attachment
t
10.5 Check tilting cylinder bearing and secure attachment
t
10.6 Check fork arms and fork arm carriage for wear and
damage
t
10.7 Perform sight check of rollers, sliding elements, and
stops
t
10.8
Check tilting angle of lifting mast.
Check uniform extension of both tilting cylinders.
t
10.9
Check mast play and adjust lateral play by means of
shims, if necessary.
t
General
measure-
ments: 11.1 Check electrical system for earth fault according to
VDI 2511
t
11.2 Check travel speed and braking distance
t
11.3 Check lifting and lowering speed
t
Demon-
stration: 12.1 Perform trial run under nominal load
t
12.2 Upon completion of servicing operations, demonstrate
the vehicle to the person responsible
t
F 5
508
2973
- 501
1633
3 GB
Maintenance intervals
Standard =
t
W M M M
1 6 12 24
Electr.
system: 7.1 Check function of instruments and indicators
t
7.2 Check cables for secure connection and damage
t
7.3 Check cable guides for function and damage
t
7.4 Check the warning devices and safety circuits for correct
function
t
7.5 Check contactor
t
7.6 Check fuses for correct amperage
t
7.7 Clean installation space of electronics and cooling fins
t
7.8 Read out and clear error memory
t
Electric
motors: 8.1 Check the motor for secure attachment
t
8.2 Check fan for correct function
t
8.3 Clean motor cooling fins
t
Battery: 9.1 Check battery cables for damage and replace, if
necessary
t
9.2 Check acid density, acid level, and cell voltage
t
9.3 Check terminals for secure attachment and apply
grease
t
9.4 Clean battery plug connections, check for tight seat
t
Lifting mast: 10.1 Apply lubricating grease to slide way and lateral
stopping face of the guide rollers in the lifting mast
profiles.
t
10.2 Check lifting chains for wear and adjust.
t
10.3 Grease lifting chains and check tension.
t
10.4 Check lifting mast attachment
t
10.5 Check tilting cylinder bearing and secure attachment
t
10.6 Check fork arms and fork arm carriage for wear and
damage
t
10.7 Perform sight check of rollers, sliding elements, and
stops
t
10.8
Check tilting angle of lifting mast.
Check uniform extension of both tilting cylinders.
t
10.9
Check mast play and adjust lateral play by means of
shims, if necessary.
t
General
measure-
ments: 11.1 Check electrical system for earth fault according to
VDI 2511
t
11.2 Check travel speed and braking distance
t
11.3 Check lifting and lowering speed
t
Demon-
stration: 12.1 Perform trial run under nominal load
t
12.2 Upon completion of servicing operations, demonstrate
the vehicle to the person responsible
t