Jungheinrich EFG-Vac 22, Руководство по эксплуатации, Страница: 58 / 81

E 23
508
2973
- 501
1633
3 GB
4.6 Operating the lifting equipment and
attachments (SOLOPILOT)
f
The SOLOPILOT must only be operated
from the driver seat. The driver must
have been instructed about the handling
of the lifting unit and attachments!
Lifting/lowering fork arm carriage
– To lift the fork arm carriage, pull
SOLOPILOT (16) to the rear.
– To lower the fork arm carriage, push
SOLOPILOT (16) to the front.
Lifting mast tilting forward/backward
f
Make sure not to put any parts of the body between mast and front wall when tilting
the mast backward.
– To tilt the fork arm carriage backward, pull SOLOPILOT (17) to the rear.
– To tilt the lifting mast forward, push SOLOPILOT (17) to the front.
Controlling attachments
f
Observe the carrying capacity of the attachment.
– SOLOPILOT auxiliary hydraulic system ZH 1 (18) (e. g. side shifting device)
– Pull to the back or push to the front SOLOPILOT ZH2 (19) for controlling the
attachment.
– Using key (20) the SOLOPILOT ZH2 (19) can be switched to auxiliary hydraulics
(ZH3).
The excursion of the SOLOPILOT movements control the lifting speed of the
hydraulic cylinders.
After releasing the SOLOPILOT it travels automatically back to its home position and
the working equipment remains in the position reached.
m
Always operate the SOLOPILOT sensitively and not erratically. Immediately release
the SOLOPILOT when the working equipment reaches the limit stop.
f
Lifting of persons using the lifting device
is prohibited.
16 17 18
20
19
E 23
508
2973
- 501
1633
3 GB
4.6 Operating the lifting equipment and
attachments (SOLOPILOT)
f
The SOLOPILOT must only be operated
from the driver seat. The driver must
have been instructed about the handling
of the lifting unit and attachments!
Lifting/lowering fork arm carriage
– To lift the fork arm carriage, pull
SOLOPILOT (16) to the rear.
– To lower the fork arm carriage, push
SOLOPILOT (16) to the front.
Lifting mast tilting forward/backward
f
Make sure not to put any parts of the body between mast and front wall when tilting
the mast backward.
– To tilt the fork arm carriage backward, pull SOLOPILOT (17) to the rear.
– To tilt the lifting mast forward, push SOLOPILOT (17) to the front.
Controlling attachments
f
Observe the carrying capacity of the attachment.
– SOLOPILOT auxiliary hydraulic system ZH 1 (18) (e. g. side shifting device)
– Pull to the back or push to the front SOLOPILOT ZH2 (19) for controlling the
attachment.
– Using key (20) the SOLOPILOT ZH2 (19) can be switched to auxiliary hydraulics
(ZH3).
The excursion of the SOLOPILOT movements control the lifting speed of the
hydraulic cylinders.
After releasing the SOLOPILOT it travels automatically back to its home position and
the working equipment remains in the position reached.
m
Always operate the SOLOPILOT sensitively and not erratically. Immediately release
the SOLOPILOT when the working equipment reaches the limit stop.
f
Lifting of persons using the lifting device
is prohibited.
16 17 18
20
19