Jungheinrich EFG-Vac 22, Руководство по эксплуатации, Страница: 59 / 81

508
2973
- 501
1633
3 GB
E 24
4.7 Picking up, transporting, and putting down load units
m
Before picking up a load unit the driver must make sure that it has been correctly
palletised and does not exceed the permissible capacity of the truck.
Observe load diagram!
Adjusting the fork arms
f
The fork arms must be adjusted in such
a way that both have the same distance
to the outside edges of the fork arm
carriage and the load centre is centred
between the fork arms.
– Swivel locking lever (49) upward.
– Push the fork arms (48) on the fork
arm carriage (50) into the correct
position.
– Swivel locking lever downward and
shift the fork arm until it latches in a
notch.
Picking up a load
– Carefully approach the load to be
picked up.
– Engage the parking brake (3).
– Set the mast to vertical position.
– Lift the fork arms to the appropriate
height relative to the load.
3
508
2973
- 501
1633
3 GB
E 24
4.7 Picking up, transporting, and putting down load units
m
Before picking up a load unit the driver must make sure that it has been correctly
palletised and does not exceed the permissible capacity of the truck.
Observe load diagram!
Adjusting the fork arms
f
The fork arms must be adjusted in such
a way that both have the same distance
to the outside edges of the fork arm
carriage and the load centre is centred
between the fork arms.
– Swivel locking lever (49) upward.
– Push the fork arms (48) on the fork
arm carriage (50) into the correct
position.
– Swivel locking lever downward and
shift the fork arm until it latches in a
notch.
Picking up a load
– Carefully approach the load to be
picked up.
– Engage the parking brake (3).
– Set the mast to vertical position.
– Lift the fork arms to the appropriate
height relative to the load.
3