Jungheinrich EFG-Vac 22 Скачать руководство пользователя страница 48 | Manualshive

Страница: 48 / 81

Jungheinrich EFG-Vac 22 Скачать руководство пользователя страница 48

E 13

508

2973

- 501

1633

3 GB

Operating Instructions for the (Automatic) Support System

f

Before travel starts, the function of the
support system must be checked.

The stop knob (2) must not be locked.

– Sit down
– Turn the switch key to "On".

After having released the parking brake,
both safety straps on the left and right
side close and lock automatically.

Pay attention that the safety straps can
freely move.

After having parked the truck and app-
lied the parking brake, the safety straps
open automatically.

Only turn the switch key to "0" and take
it out after the safety straps have opened.

In the event of a power failure, the support system can be unlocked by means of pul-
ling knob (3). The safety straps can then be swivelled backwards manually.

Operating Instructions for the (Mechanical) Support System

f

Before travel starts, the function of the support system must be checked.

For opening, press the left retaining strap inwards and swivel it upwards
simultaneously, after having released the strap, it automatically swivels downwards
and locks.

2

3

E 13

508

2973

- 501

1633

3 GB

Operating Instructions for the (Automatic) Support System

f

Before travel starts, the function of the
support system must be checked.

The stop knob (2) must not be locked.

– Sit down
– Turn the switch key to "On".

After having released the parking brake,
both safety straps on the left and right
side close and lock automatically.

Pay attention that the safety straps can
freely move.

After having parked the truck and app-
lied the parking brake, the safety straps
open automatically.

Only turn the switch key to "0" and take
it out after the safety straps have opened.

In the event of a power failure, the support system can be unlocked by means of pul-
ling knob (3). The safety straps can then be swivelled backwards manually.

Operating Instructions for the (Mechanical) Support System

f

Before travel starts, the function of the support system must be checked.

For opening, press the left retaining strap inwards and swivel it upwards
simultaneously, after having released the strap, it automatically swivels downwards
and locks.

2

3

«
...
46
47
48
49
50
...
»

Содержание EFG-Vac 22


















































































Отзывы:

Нет отзывов