Jungheinrich EFG-Vac 22 Скачать руководство пользователя страница 44 | Manualshive

Страница: 44 / 81

Jungheinrich EFG-Vac 22 Скачать руководство пользователя страница 44

E 9

508

2973

- 501

1633

3 GB

Adjusting the backrest:

– Pull up backrest adjusting lever (42)

and adjust the tilt of the backrest.

– Release backrest adjusting lever (42)

again, the backrest is locked in its
position.

Adjusting the seating position:

– Pull driver seat locking lever (39)

outward and set driver seat to the
desired seating position by sliding it
forward or backward.

– Allow locking lever (39) to latch again.

f

The driver seat locking must be securely latched in the adjusted position. The driver
seat setting must not be modified while travelling!

A

The driver seat adjustment procedure applies to the standard series equipment. For
other models the adjusting procedure of the respective manufacturer is to be used.
When adjusting the seat make sure that all operating elements can be reached easily.

42

41

40

39

E 9

508

2973

- 501

1633

3 GB

Adjusting the backrest:

– Pull up backrest adjusting lever (42)

and adjust the tilt of the backrest.

– Release backrest adjusting lever (42)

again, the backrest is locked in its
position.

Adjusting the seating position:

– Pull driver seat locking lever (39)

outward and set driver seat to the
desired seating position by sliding it
forward or backward.

– Allow locking lever (39) to latch again.

f

The driver seat locking must be securely latched in the adjusted position. The driver
seat setting must not be modified while travelling!

A

The driver seat adjustment procedure applies to the standard series equipment. For
other models the adjusting procedure of the respective manufacturer is to be used.
When adjusting the seat make sure that all operating elements can be reached easily.

42

41

40

39

«
...
42
43
44
45
46
...
»

Содержание EFG-Vac 22


















































































Отзывы:

Нет отзывов