Commissioning of the JUNG Smart Control IP
Date 2013-07-07 v1.1.3
7
The local device password must then be entered.
Figure 2-2: Entering the device password
If you do not know the device password, then you can contact JUNG
Customer Services to obtain a single-validity password using the
displayed TAN.
To adjust the network settings locally, open the "Network" page using
the "Network" button.
Figure 2-3: Opening the network settings
If the "Network settings" button is selected on this page, it is possible
to switch between "Manual" and "DHCP" using the shift key.
