Commissioning of the JUNG Smart Control IP
Date 2013-07-07 v1.1.3
6
2
Commissioning
The major part of the commissioning process takes place via the web
interface of the configuration server in the Smart Control IP. To allow
the commissioning PC to access the configuration server of the
Smart Control IP, the network settings of the two devices must be
matched.
2.1
Default settings
The Smart Control IP has the following default settings:
Network settings
Manual
IP address
192.168.0.10
Gateway
192.168.0.1
Subnet mask
255.255.255.0
DNS server
192.168.0.1
Device password
0000
(for local access)
System passwords
12345
(for access via the browser)
2.2
Local configuration
To adjust the configuration locally, open the Settings page using the
"Settings" button.
Figure 2-1: Opening the Settings page
