Commissioning of the JUNG Smart Control IP
Date 2013-07-07 v1.1.3
18
2.3.4.2 Display
Figure 2-16: Setting the display
In the basic setting of the Smart Control IP, the display is switched on
after each restart, on each actuation and on each door
communication call.
After a settable time, the display is then switched off automatically.
If, for example, during the evening, it is relatively dark in the area of
the Smart Control IP, then full display brightness may be considered
as too bright. In this case, the brightness adjustment can be
activated. The brightness adjustment adjusts the strength of the
display lighting according to the ambient brightness in multiple stages
with a slight delay.
