Jung Smart Control IP, Пусконаладка

Страница: 32 / 33

Commissioning of the JUNG Smart Control IP
Date 2013-07-07 v1.1.3 32

%address% is the text of the command address. For this, all the
texts are converted into lower-case letters and spaces removed.

%type% is the type of time channel with the following display:

0 = Binary,
 1 = Analogue_0 … 100,

2 = Analogue_0 ... 255,
 3 = Analogue_0 … 65535

%sendValue% = Calculated transmission value

%unit% is the unit specified in the web interface.

\n is the character for the end of the text
On conversion into the UDP command, the minimum and maximum
display values are converted to the type given above. This means
that, with an "Analog (0 ... 100)" type and a minimum value of 15 and
a maximum value of 25, the set value 20 is converted to the value 50
on transmission.
The astro function allows adjustment to the annual shift in sunrise
and dusk. When the astro function is activated, the set time is used
as a limit time. Whether the limit time affects sunrise or sunset is
evaluated by the device according to the set time. Times between
00:00 and 11:59 are evaluated as sunrise and times between 12:00
and 23:59 as sunset.
"Astro lighting" setting:

Sunrise (switching times 00:00 - 11:59): if sunrise occurs before
the set time (for example in the summer months), then, at sunrise,
the switching time command (e.g. external lighting OFF) is
transmitted. If sunrise occurs later (for example during the winter
months), then the switching time command is transmitted at the
set time at the latest.

Sunset (switching times 12:00 - 23:59): if sunset occurs after the
set time (for example in the summer months), then the switching
time command (e.g. external lighting ON) is transmitted at sunset.
If sunset occurs earlier (for example during the winter months),
then the switching time command is transmitted at the set time at
the latest.
"Astro shading" setting:

Sunrise (switching times 00:00 - 11:59): if sunrise occurs after the
set time (for example in the winter months), then the switching
time command (e.g. rolling shutters UP) is only transmitted at
sunrise. If sunrise occurs earlier (for example during the summer
months), then the switching time command is transmitted at the
set time at the latest.

Sunset (switching times 12:00 - 23:59): if sunset occurs before
the set time (for example in the winter months), then the switching
time command (e.g. rolling shutter DOWN) is transmitted at
sunset. If sunset occurs later (for example during the summer