Commissioning of the JUNG Smart Control IP
Date 2013-07-07 v1.1.3
28
Figure 2-26: Timeout setting
After pressing the ring push-button of the door station, the SIP
gateway automatically calls the Smart Control IP. In addition to the
ring tone, the video image of the door station may also be displayed.
The connection can then be accepted on the Smart Control using the
"Speak" button. Pressing the "Speak" button again terminates the
speech connection. When the door is opened by pressing the "Door
opener" button, the speech connection is also terminated. The image
from the door camera is then displayed for the set run-on time.
2.6.2 Local settings
In addition to the settings made via the web interface, additional
settings can be made locally on the Smart Control.
In order to adapt these settings, press the "Door communication"
button on the Settings page. The options "Ring tones", "Volume" and
"Image memory" are then available.
