JUMO 202755/20, Руководство по эксплуатации

Страница: 36 / 72

10 Operation
36
10.5 Measurement mode
Representation In measurement mode, the conductivity is shown (compensated for the
reference temperature) or the concentration and temperature of the medium
being measured.
10.6 Operator level
All the parameters that have been enabled by the administrator (administrator
level) can be edited in this level. All other parameters (marked by a key
)
can only be read.
✱
Press the key for at least 3 seconds.
✱
Select OPERATOR LEVEL.
(1) MEASUREMENT -> Measurement mode
(2) 20.5°C -> Temperature of the sample medium
(3) 203 mS/cm -> conductivity of the medium (compensated for the
reference/comparison temperature – usually 25°C)
PGM
(1)
(2)
(3)