JUMO 202755/20, Руководство по эксплуатации

Страница: 30 / 72

30
9 Commissioning
9.1 Head-mounted transmitter or split version
✱
Mounting the device, see "Mounting", Page 18.
✱
Connecting the device, see "Installation", Page 25.
9.2 Replacement sensor
✱
Connect up the sensor as described in the operating instructions for the
replacement sensor.
✱
Calibrate the sensor as described in the operating instructions for the
replacement sensor.
The transmitter has been tested in the factory for fault-free functioning, and is
delivered ready for operation.
For devices with a separate sensor (type code extensions (2) /60 or /65), the
transmitter and detached sensor are matched to one another at the factory!
When connecting the components, please note that the serial number of the
external sensor (marked on the label attached to the connecting cable) must
match the serial number marked on the nameplate of the transmitter!
The separate sensor must be connected before switching on the transmitter!
After changing the separate sensor, the voltage supply of the transmitter (with
connected sensor) must be switched off and on again!