JUKI LU-2860V-7, Инструкция по эксплуатации

Страница: 44 / 172

– 39 –
[How to adjust condensation pitch]
[Setting the number of condensation stitches]
In the case of performing condensation stitching after
thread trimming (condensation stitching is placed in ON),
set values of the stitch length and that of the number of
condensation stitching can be changed.
Adjust those set values appropriately according to the
item to be sewn.
1) Press . Select "1. Memory switch" from
the menu list.
2) Select "U280 Number of end condensation
stitches for shorter-thread remaining thread
trimming" from "1. Display all".
3) Set the number of stitches.
(Factory-set value: 1)
4) Confirm your entry by pressing ❶ .
Then, the sewing screen is displayed.
Normal stitch length
Condensation stitch length
1. If the condensation stitch length is extremely short, the material can be torn by the seam to cause
stitch skipping. This may cause a thread trimming failure.
2. If a thread trimming failure occurs, when using a heavy-weight material, since the needle enters
the same entry points repeatedly during thread trimming and condensation stitching, the thread
trimming and condensation stitching function should be placed in OFF or the condensation stitch
length should be adjusted to a larger value.
❶
[Setting the stitch length of condensation stitching]
1) Press . Select "1. Memory switch" from
the menu list.
2) Select "K281 Condensation stitch length
after shorter-thread trimming end" from "1.
Display all".
3) Set the stitch length of condensation stitch-
ing. (Factory-set value: 2.0)
4) Confirm your entry by pressing
❶
.
Then, the sewing screen is displayed.
❶