JUKI LU-2860V-7, Инструкция по эксплуатации

Страница: 35 / 172

– 30 –
[Bobbin winding mode]
To wind a bobbin only or to check the oil quantity in the hook, the bobbin winding mode should be used.
Depress the pedal to start winding a bobbin.
1) Display the mode screen by pressing
❶
.
2) Select the "2. Bobbin winding mode".
3) The sewing machine mode is changed over
to the "Bobbin winding mode".
The sewing machine runs with its presser
foot up when the pedal is depressed. In this
state, a bobbin can be wound. The sewing
machine runs only as long as the pedal is
depressed.
When ❷ is pressed, the sewing ma-
chine exits from the "Bobbin winding mode".
1. Remove the needle thread from the thread path of thread take-up and remove the bobbin from the
hook.
2. There is the possibility that the thread pulled out from the thread stand is loosened due to the influ -
ence (direction) of the wind and may be entangled in the handwheel. Be careful of the direction of
the wind.
3. The speed of the sewing machine under the bobbin winding mode is equal to the one which has
been set for the machine head.
❶
❷