manualshive.com logo in svg

JUKI LU-2860V-7, Инструкция по эксплуатации

Поделиться
Скачать
JUKI LU-2860V-7 Скачать руководство пользователя страница 157

– 152 –

9-9-2. USB

②

 Precautions to be taken when handling USB devices

  •   Do not connect to the USB connection terminal other than the USB memory.
 

It may cause failure.

  •   Do not leave the USB device or USB cable connected to the USB port while the sewing machine is in opera-

tion. The machine vibration can damage the port section resulting in loss of data stored on the USB device or 
breakage of the USB device or sewing machine.

  •    Do not insert/remove a USB device during reading a program or sewing data.
 

It may cause data breakage or malfunction.

  •    When the storage space of a USB device is partitioned, only one partition is accessible.
  •   Never forcefully insert a USB thumb drive into the USB connector while carefully checking the orientation of 

the USB thumb drive. Forceful insertion of the USB thumb drive can cause failure.

  •  JUKI does not compensate for loss of data stored on the USB device caused by using it with this sewing ma-

chine. 

  •    In principle, connect only one USB thumb drive to the operation panel. When two or more devices/media are 

connected/inserted, the machine will only recognize one of them. Refer to the USB specifications.

  

•  Do not turn the power OFF while the data on the USB flash drive is being accessed.

③

 USB specifications

•   Conform to USB 1.1 standard
•   Applicable devices *1 ____ USB memory
•   Format supported  ______ FAT 12, FAT 16, FAT 32
•   Applicable medium size __ 4.1MB ~ 2TB 
•   Consumption current  ____ The rated consumption current of the applicable USB devices is 500 mA at the 

maximum.

  *1: JUKI does not guarantee operation of all applicable devices. Some device may not operate due to a compati-

bility problem.

①

 Position of the USB connector

[USB thumb drive insertion position]

The USB connector is provided on top 

❶

 of the op-

eration panel.
To use a USB thumb drive, remove connector cover 

❷

 and insert the USB thumb drive into the USB con-

nector.
  * In the case a USB thumb drive is not used, the 

USB connector should be protected with connec-
tor cover 

❷

 without exceptions.

If dust or the like enters the USB connector, a failure 
can be caused.

Sewing data, custom pitch data and condensation custom data can be copied on a commercially-available 
USB thumb drive.
Refer to 

"9-9-1. Data communication" p. 149

 for details of how to copy the sewing data on a USB thumb 

drive.

❶

❷

Содержание LU-2860V-7













































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды