manualshive.com logo in svg

JUKI LU-2860V-7, Инструкция по эксплуатации

Поделиться
Скачать
JUKI LU-2860V-7 Скачать руководство пользователя страница 61

– 56 –

Name

Function

❶

Pattern No. button

This button is used for displaying numbers of the registered sewing patterns and cycle 
patterns.
(Cycle pattern numbers that are not registered are not displayed.)
When this button is pressed, the sewing pattern is put into the selected state.
Display range: Sewing pattern numbers 1 to 99 and cycle patterns 1 to 9.

❷

Pattern number (in the 
order of registration of 
characters) button

Sewing pattern is displayed and the pattern is put into the selected state by pressing this 
button. 

❸

Sorting button

This button is used for sorting the registered patterns in the order of sewing pattern num-
ber, process, part number or comment.

❹

Refining button

This button is used for displaying the refiner setting screen.

❺

New sewing pattern cre-
ation button

This button is used for creating a new sewing pattern.
Refer to 

"9-1-1. Creation of a new pattern" p. 119

.

* This button is only displayed under the maintenance personnel mode.

❻

New cycle pattern cre-
ation button

This button is used for creating a new cycle pattern.
Refer to 

"9-3. Cycle pattern" p. 130

.

* This button is only displayed under the maintenance personnel mode.

❼

Pattern copy button

This button is used for copying a sewing pattern or cycle pattern and registering the 
copied pattern with new number.
Refer to 

"9-1-2. Copying a pattern" p. 121

.

* This button is only displayed under the maintenance personnel mode.

❽

Pattern delete button

This button is used for displaying the pattern deletion confirmation message.

In the case there is only one registered pattern, the pattern cannot be deleted.
* This button is only displayed under the maintenance personnel mode.

❾

Scroll (up) button

This button is used for displaying the previous page.

Scroll (down) button

This button is used for displaying the next page.

Close button

This button is used for cancelling the selected pattern and displaying the sewing screen.

Enter button

This button is used for confirming the selected pattern and displaying the sewing screen. 

Display of pattern data 
being selected

This button is used for displaying data on the pattern that is being selected.

Содержание LU-2860V-7













































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды