JUKI LK-1900B series, Руководство инженера

Страница: 137 / 174

– 123 –
11. Error list
Error
code
Indica-
tion
Description of error Corrective measure Remarks
E007 Machine lock error
The main shaft of the sewing ma-
chine does not rotate due to some
troubles.
Turn OFF the power switch
and remove the cause of
troubles.
E010 Pattern No. error
Back-uped pattern No. has not
been registered in the data ROM,
or it is set to readout inoperative.
Pattern No. is set to “0”.
Press the reset switch and
check the pattern No.
Check the contents of
memory switch No. 201.
E011 External media not inserted
USB thumb drive is not inserted.
Re-operation is enabled
after resetting.
E012 Read error, external
Data cannot be read from the USB
thumb drive.
Re-operation is enabled
after resetting.
E013 Write error, external
Data cannot be written on the USB
thumb drive.
Re-operation is enabled
after resetting.
E014 Write-protect
USB thumb drive is write-protected.
Re-operation is enabled
after resetting.
E015 Format error
USB thumb drive cannot be format-
ted.
Re-operation is enabled
after resetting.
E016 External media capacity over
Memory capacity of the USB thumb
drive to write pattern data is not suf-
ficient.
Re-operation is enabled
after resetting.
E017 Machine memory capacity over
Memory capacity of the sewing
machine to write pattern data is not
sufficient.
Re-operation is enabled
after resetting.
E019 File size over
The pattern data to be read from
the USB thumb drive is too large.
(Max.: Approximately 20000 stitch-
es)
Re-operation is enabled
after resetting.
E024 Pattern data size over
The pattern data to be written on
the sewing machine memory is too
large. (Max.: Approximately 20000
stitches)
Re-operation is enabled
after resetting.
E030 Needle bar position error
Needle bar is not in the specified
position.
Turn the hand pulley to
return the needle bar to its
specified position.