JUKI AMB-289, Руководство инженера

Страница: 110 / 177

– 106 –
(6) Formatting
In case of re-formatting the smart media, be sure to perform it with IP-200. The smart media formatted with the
personal computer cannot be read with IP-200.
1) Display the smart media format screen.
When MODE key is held pressed for three
seconds, smart media format button is
displayed on the screen. When this button is pressed,
the smart media format screen is displayed.
2) Start formatting of the smart media.
Set the smart media you desire to format to the smart
media slot, close the cover, press ENTER
button and formatting starts.
(Caution) Save necessary data in the smart media
to the other vehicle before formatting.
When formatting is performed, the inside
data are deleted.
[ Prohibition items in handling the smart media ]
1
Smart media is a precision electronic instrument. Do not bend it or apply shock to it.
2
It is recommended to periodically save the data saved in the smart media to the other vehicle to prepare for
accidents.
3
When initializing the data, perform it after checking that necessary data do not exist in the card.
4
Avoid using or storing the smart media in a place of high temperature and high humidity.
5
Avoid using the smart media near exothermic and combustible articles.
6
If the contact part of the card becomes dirty, failure of contact will be caused. Do not touch by hand, and control
so that dust, oil, or other foreign material does not adhere to it. In addition, the inside element is damaged by
static electricity or the like. So, be very careful when handling.
7
Smart media has a span of life. Writing and deletion cannot be performed after an extended period of use. In this
case, replace it with a new one.