5-59
5.3.4.6 Change of Channels and Transmission Power (CHANNEL/POWER)
Select
6.CHANNEL/POWER SET
and enter password, Channels and power can be changed.
Caution
:
Normally, AIS is operated by regulated channels.
Ship’s administrators must be responsible for any change.
a) Password input
・
Password is composed of alphabet “A
~
Z” and numeric “0
~
9”.
・
After the 4 digits are input, then the cursor moves to [ENT].
・
If [ENT] is selected, Channels and power changing screen is displayed. If [EXIT] is selected, switch to
SET UP screen.
b) Channels and power change
Set the channel number and select transmission power
・
After channel and power changing screen is displayed, the cursor is on
1.CH A
.
・
Select
1. CH A
and press ENT key. The cursor move to on the left side of channel number.
・
Refer to 5.2.5 character input method to input.
・
Press ENT key on the right side of the channel number, the cursor moves to next item.
(
2.CH B
takes same procedure.)
・
Transmission power is selected as shown below.
HIGH
・・・・・・・
normal power
LOW
・・・・・・・
1W
Select the power and press ENT key. The cursor moves to [SET].
・
If [SET] is selected, AIS starts operation by the setting.
・
If [EXIT] is selected, switch to SET UP screen.
If invalid channels are inputted or it can not be set, error popup screen (same as “5.3.4.3 Regional
channel setting”) is appeared.
•
The transmission power set here is not the same as that of “5.3.4.4 POWER REDUCTION” and the
AIS will continue operation by the set power and is not dependent on the distance moved.
•
The setting changed in this menu is reverted to default by restarting the equipment.
C H A N N E L / P O W E R
P A S S W O R D :
*
* * *
A
B C D E F G H I J K L M N O P Q R S T U
V W X Y Z .
0 1 2 3 4 5 6 7 8 9 [ \ ] _
" # $ % & ' ( ) ? @ + - * / ^ , : ; < = >
!
[ E N T ] [ E X I T ]
Input field
C H A N N E L / P O W E R
1 . C H
A
: 2 0 8 7
2 . C H
B : 2 0 8 8
3 . P O W E R : H I G H
[ S E T ]
[ E X I T ]
C H A N N E L / P O W E R
C H A N N E L
E R R O R
[ O K ]
Содержание JHS-183
