JRC J-Marine NeCST, Инструкция по эксплуатации

Страница: 87 / 292

3-26
This section describes the route data to be displayed during route planning.
Set items below as needed.
(1) No.: WP number. Automatically assigned from 001. Can add up to WP512.
(2) Name: Set the WP name.
(3) Latitude: Latitude of the WP
Longitude: Longitude of the WP
(4) Turn Radius: Set the turn radius (0.00 to 9.99 NM).
(5) ETA: The estimated arriving time is displayed ISO8601 format
(6) Course: Bearing to the next WP
(7) Distance: Distance to the next WP
(8) Sail: Select [RL] or [GC].
(9) XTD PORT: Set the route width of the port side (0.01 to 5.00 NM).
(10) XTD STBD: Set the route width of the starboard side (0.01 to 5.00 NM).
(11) Plan Speed: Set the planned ship speed (1.0 to 40.0 kn).
(1) (2) (3) (4) (5)
(6) (7) (8) (9) (10) (11)