JRC J-Marine NeCST Скачать руководство пользователя

Страница: 7 / 292

Specific Procedures for Cardiopulmonary Resuscitation (CPR)

1. Check the scene for safety to prevent secondary disasters

a) Do not touch the injured or ill person in panic when an accident has occurred. (Doing so may

cause electric shock to the first-aiders.)

b) Do not panic and be sure to turn off the power. Then, gently move the injured or ill person to a

safe place away from the electrical circuit.

2. Check for responsiveness

a) Tap the shoulder of the injured or ill and shout in the ear saying, "Are

you OK?"

b) If the person opens his/her eyes or there is some response or

gesture, determine it “s "responding." But, if there is no response or
gesture, determine it “s "not responding."

3. If responding

a) Give first-aid treatment.

4. If not responding

a) Ask for help loudly. Ask somebody to make an emergency call and bring an AED.

• Somebody has collapsed. Please help.

• Please call an ambulance.

• Please bring an

AED

• If there is nobody to help, call an ambulance yourself.

5. Check for breathing

a) Check the his/her chest and abdomen rise and fall.

b) If the injured or ill person is breathing, place him/her in the recovery position and wait for the

arrival of the emergency services.

• Turn his/her body sideways.

Please call an
ambulance.

Please bring an AED.

Are you OK?

Содержание J-Marine NeCST





































































































































































































































































































Результаты поиска

Содержание J-Marine NeCST

Отзывы:

Похожие инструкции для J-Marine NeCST

Бренды по названию

Популярные бренды

JRC J-Marine NeCST, Инструкция по эксплуатации

Результаты поиска

Содержание J-Marine NeCST

Отзывы:

Похожие инструкции для J-Marine NeCST

Бренды по названию

Популярные бренды