Jonsered FR 2113 MA 4X4 Скачать руководство пользователя | Manualshive

Страница: 40 / 56

background image

38

– English

6008-024

6017-023

8009-137a

Mowing deck (rear ejection)

Mulching 90 cm FR 2111 M, FR 2113 MA

8009-288

Combi 103 cm FR 2116 MA

MAINTENANCE

Inspecting the blades

It is important that the blades are undamaged and
well-ground to give the best mowing result.

Check that the blades’ mounting bolts are
tightened.

IMPORTANT INFORMATION

Replacement or sharpening of the blades
should be carried out by an authorised
service workshop.

IMPORTANT INFORMATION

The blades on the double blade Mulching unit
should always be set relative to each other as
illustrated, with a 90° angle between the
blades. Otherwise the blades can collide and
cause damage to the mowing deck.

The blades should be balanced after sharpening.

Damaged blades should be replaced when hitting
obstacles that result in a breakdown. Let the
servicing dealer judge whether the blade can be
repaired/ground or must be discarded.

Replacing the shear pin FR 2111 M,
FR 2113 MA

The blades are fitted with a shear pin to protect the
Mulching unit and its drive when colliding with
obstacles. A domed, spring friction washer is fitted
to each blade bolt. The washer must always be
replaced with a new washer when replacing the
shear pin. Otherwise the shear pin can break
causing the blades to collide.
Only use original spare parts. A set containing a
blade, shear pin and friction washer can be
purchased from your dealer.
1. Put the cutting unit in the service position, see

”Service position for the cutting unit\Placing in
the service position”.

2. Remove the blade (2A) by removing the blade

bolt with washer and friction washer (2B).

3. Remove the remains of the broken shear pin (3).
4. Make sure the contact surfaces (4) on the blade

and the blade mounting are free from metal.
Clean if necessary.

5. Fit

a

new shear pin (5) in the blade mounting.

6. Fit the blade (6), make sure it is fitted as illus-

trated.

7. Fit a

new

friction washer (7) with the concave

face turned towards the blade.

8. Fit the blade bolt with washer (8). Tightening

torque 45-50 Nm (4.5-5 kpm/32-36 lbft)

«
...
38
39
40
41
42
...
»

Содержание FR 2113 MA 4X4

























































Отзывы:

Нет отзывов

Похожие инструкции для FR 2113 MA 4X4

Бренд: Yard-Man Страницы: 16

Бренд: Kärcher Страницы: 12

Бренд: Homelite Страницы: 22

Бренд: Encore Страницы: 20

Бренд: Murray Страницы: 56

Craftsman 944.601181

Бренд: Sears Страницы: 52

Бренд: Yard-Man Страницы: 11

Бренд: Yard-Man Страницы: 11

Бренд: Yazoo/Kees Страницы: 24

Бренд: Gtech Страницы: 68

Бренд: Simplicity Страницы: 26

Бренд: Lastec Страницы: 23

Бренд: MTD Страницы: 2

Бренд: Cramer Страницы: 184

Бренд: Craftsman Страницы: 48

Бренд: Craftsman Страницы: 48

Бренд: Craftsman Страницы: 20

Бренд: Craftsman Страницы: 21

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды