manualshive.com logo in svg

Jonsered FR 2113 MA 4X4, Руководство оператора

Поделиться
Скачать
Jonsered FR 2113 MA 4X4 Скачать руководство пользователя страница 15

English – 

13

8009-247

8009-248

6004-006H

PRESENTATION FR 2113, FR 2116

Parking brake

The parking brake is activated as follows:

1.   Press down the parking brake pedal (1).

2.   Press in the lock button (2) on the steering

column.

3.   Release the parking brake pedal while keeping

the button pressed in.

The parking brake lock is automatically disengaged
when the parking brake pedal is pressed down.

Throttle and Choke controls

The throttle is used to control the speed of the
engine and thereby also the rotation speed of the
blades.

The control is also used to activate the choke.
When the choke is engaged a richer fuel/air mixture
is fed to the engine, which facilitates starting in the
cold.

Accelerator

The speed of the machine is variably controlled
using two pedals. Pedal (1) is used to travel for-
wards and pedal (2) to reverse.

WARNING!
Make sure that no branches can
interfere with the pedals when
mowing under bushes.
Risk for unintentional
manoeuvring.

Содержание FR 2113 MA 4X4

























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды